Dellorto ME Parts

Dellorto ME Carburetor Parts
Dellorto ME Carburetor Parts

Dellorto ME Carburetor Parts.

On this page you will find all currently available parts for the Dellorto ME range carburetors.

Click HERE for an exploded view drawing of the Dellorto ME.

The numbers in the drawing correspond to the numbers in brackets at the beginning of the article description.

We are still very much expanding our parts offerings for these carburettors so please contact us by email if the part that you are looking for is not yet listed.

Dellorto ME Carburetor Parts

(3) Throttle Cable Adjuster for Dellorto ME carburetors

1104
Add to cart

Throttle cable adjuster for the Dellorto ME series carburetors.

This cable adjuster uses lock nut Number 1691 to secure its setting.

For your convenience, you can order the lock nut right along with the adjuster by simply selecting it through the drop box above.

Required number per carburettor: 1

This is item number 3 in the drawing.

(3) Throttle Cable Adjuster for Dellorto ME carburetors

  • More
  • Related Products

(3) Throttle Cable Adjuster for Dellorto ME carburetors
(3) Throttle Cable Adjuster for Dellorto ME carburetors
(3) Throttle Cable Adjuster for Dellorto ME carburetors
(3) Throttle Cable Adjuster for Dellorto ME carburetors
(3) Throttle Cable Adjuster for Dellorto ME carburetors

(4) Lock Nut for Throttle Cable Adjuster on Dellorto ME carburetors - 1691

1691
Add to cart

Lock nut to secure the setting of the throttle cable adjuster on the Dellorto ME series carburetors.

Required number per carburettor: 1

This is item number 4 in the drawing.

Dellorto Part Number: 1691

 

 

(4) Lock Nut for Throttle Cable Adjuster on Dellorto ME carburetors - 1691

  • More
  • Related Products

(4) Lock Nut for Throttle Cable Adjuster on Dellorto ME carburetors - 1691
(4) Lock Nut for Throttle Cable Adjuster on Dellorto ME carburetors
(4) Lock Nut for Throttle Cable Adjuster on Dellorto ME carburetors - 1691
(4) Lock Nut for Throttle Cable Adjuster on Dellorto ME carburetors
(4) Lock Nut for Throttle Cable Adjuster on Dellorto ME carburetors - 1691

(11) Split Pin for Choke Lever on Dellorto ME carburetors

3793
Add to cart

Split Pin for Choke Lever on the Dellorto ME series carburetors.

Required number per carburettor: 1

This is item number 11 in the drawing.

 

 

(11) Split Pin for Choke Lever on Dellorto ME carburetors

  • More
  • Related Products

(11) Split Pin for Choke Lever on Dellorto ME carburetors
Split Pin for Choke Lever on Dellorto ME
(11) Split Pin for Choke Lever on Dellorto ME carburetors


Split Pin for Choke Lever on Dellorto ME
(11) Split Pin for Choke Lever on Dellorto ME carburetors

(20) Needle Clip for Dellorto ME carburetors

3322
Add to cart

Special-size circlip to secure the needle in a Dellorto ME carburetor.

Required number per carburettor: 1

This is item number 20 in the drawing.

 

 

 

 

(20) Needle Clip for Dellorto ME carburetors

  • More
  • Related Products

(20) Needle Clip for Dellorto ME carburetors
(20) Needle Clip for Dellorto ME carburetors
(20) Needle Clip for Dellorto ME carburetors
(20) Needle Clip for Dellorto ME carburetors
(20) Needle Clip for Dellorto ME carburetors

(21) Slide for Dellorto ME carburetors

4019
Add to cart

Slide, in size 50, for the Dellorto ME series carburetors.

Required number per carburettor: 1

This is item number 21 in the drawing.

Please note that this is the ONLY available size slide for the ME!

 

(21) Slide for Dellorto ME carburetors

  • More
  • Related Products

(21) Slide for Dellorto ME carburetors
Slide for Dellorto ME
(21) Slide for Dellorto ME carburetors
Slide for Dellorto ME
(21) Slide for Dellorto ME carburetors

(22) G-Type Needle for Dellorto ME carburetors - 4065

4065
Add to cart

This is a G-Type needle for the Dellorto ME series carburetors.

Required number per carburettor: 1

This is item number 22 in the drawing.

Please note that this is the ONLY available needle for the ME!

Dellorto Part Number: 4065

(22) G-Type Needle for Dellorto ME carburetors - 4065

  • More
  • Related Products

(22) G-Type Needle for Dellorto ME carburetors - 4065
(22) G-Type Needle for Dellorto ME carburetors - 4065
(22) G-Type Needle for Dellorto ME carburetors - 4065
(22) G-Type Needle for Dellorto ME carburetors - 4065
(22) G-Type Needle for Dellorto ME carburetors - 4065

(28) Main Jet for Dellorto ME carburetors - 3315

3315
Add to cart

Main jet for the Dellorto ME series carburetors.

Where possible, we only supply original Dellorto jets marked with the famous diamond-shaped "Inc" logo. However, sizes that are no longer supplied by Dellorto themselves are manufactured for us at the exact same high standards.

Available from our stock in size:

  • 70
  • 75
  • 80
  • 85
  • 90
  • 95

Other sizes are available on special order. Please contact us by email for that.

Required number per carburettor: 1

This is item number 28 in the drawing.

Dellorto Part Number: 3315

(28) Main Jet for Dellorto ME carburetors - 3315

  • More
  • Related Products

(28) Main Jet for Dellorto ME carburetors - 3315
(28) Main Jet for Dellorto ME carburetors - 3315
(28) Main Jet for Dellorto ME carburetors - 3315
(28) Main Jet for Dellorto ME carburetors - 3315
(28) Main Jet for Dellorto ME carburetors - 3315

(29) Mixture Screw Spring for Dellorto ME carburetors

3606
Add to cart

Mixture Screw Spring for Dellorto ME carburetors.

Spring that secures the setting of the mixture screw.

Required quantity per carburettor: 1

This is item number 29 in the drawing.

 

 

(29) Mixture Screw Spring for Dellorto ME carburetors

  • More
  • Related Products

(29) Mixture Screw Spring for Dellorto ME carburetors
(29) Mixture Screw Spring for Dellorto ME carburetors
(29) Mixture Screw Spring for Dellorto ME carburetors
(29) Mixture Screw Spring for Dellorto ME carburetors
(29) Mixture Screw Spring for Dellorto ME carburetors

(32) Spring for Throttle Stop Screw on Dellorto ME carburetors

1411
Add to cart

Spring to secure the setting of the throttle stop screw on the Dellorto ME carburetors.

Required quantity per carburettor: 1

This is item number 32 in the drawing.

 

 

(32) Spring for Throttle Stop Screw on Dellorto ME carburetors

  • More
  • Related Products

(32) Spring for Throttle Stop Screw on Dellorto ME carburetors
(32) Spring for Throttle Stop Screw on Dellorto ME carburetors
(32) Spring for Throttle Stop Screw on Dellorto ME carburetors
(32) Spring for Throttle Stop Screw on Dellorto ME carburetors
(32) Spring for Throttle Stop Screw on Dellorto ME carburetors

(34) Fiber Ring on Dellorto ME carburetors

6426
Add to cart

Fiber ring for the bottom plug on the Dellorto ME series carburetors.

Required quantity per carburetor: 1

This is item number 34 in the drawing.

 

(34) Fiber Ring on Dellorto ME carburetors

  • More
  • Related Products

(34) Fiber Ring on Dellorto ME carburetors
(34) Fiber Ring on Dellorto ME carburetors
(34) Fiber Ring on Dellorto ME carburetors
(34) Fiber Ring on Dellorto ME carburetors
(34) Fiber Ring on Dellorto ME carburetors

(50) Spring Washer for Dellorto ME carburetors

5011
Add to cart

Spring Washer for the float bowl top cover of the Dellorto ME series carburetors.

Required quantity per carburettor: 2

This is item number 50 in the drawing.

 

 

(50) Spring Washer for Dellorto ME carburetors

  • More
  • Related Products

(50) Spring Washer for Dellorto ME carburetors
Spring Washer for Dellorto ME
(50) Spring Washer for Dellorto ME carburetors
Spring Washer for Dellorto ME
(50) Spring Washer for Dellorto ME carburetors

(53) Banjo Fuel Filter for Dellorto ME carburetors

1435
Add to cart

Fuel filter that fits inside the banjo of the Dellorto ME carburetor.

Required number per carburettor: 1

This is item number 53 in the drawing.

 

 

 

 

(53) Banjo Fuel Filter for Dellorto ME carburetors

  • More
  • Related Products

(53) Banjo Fuel Filter for Dellorto ME carburetors
(53) Banjo Fuel Filter for Dellorto ME carburetors
(53) Banjo Fuel Filter for Dellorto ME carburetors
(53) Banjo Fuel Filter for Dellorto ME carburetors
(53) Banjo Fuel Filter for Dellorto ME carburetors

(55) Fiber Washer for Dellorto ME carburetors

3385
Add to cart

Fiber Washer for the fuel banjo of the Dellorto ME series carburetors.

Required quantity per carburettor: 1

This is item number 55 in the drawing.

 

 

(55) Fiber Washer for Dellorto ME carburetors

  • More
  • Related Products

(55) Fiber Washer for Dellorto ME carburetors
(55) Fiber Washer for Dellorto ME carburetors
(55) Fiber Washer for Dellorto ME carburetors
(55) Fiber Washer for Dellorto ME carburetors
(55) Fiber Washer for Dellorto ME carburetors

Sytec Fuel Line One Way Valve

OWV
Add to cart

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

  • More
  • Related Products

Sytec One Way Fuel Line Valve
Sytec One Way Fuel Line Valve
Sytec One Way Fuel Line Valve

Sytec Pro-Line in-line fuel filter - 6 mm

PRO804
Add to cart

In line fuel filter with cleanable / replaceable filter.

Suitable for 6 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 6 mm internal diameter

Sytec Pro-Line in-line fuel filter - 6 mm

  • More
  • Related Products

Sytec Pro-Line in-line fuel filter - 6 mm
Sytec Pro-Line in-line fuel filter - 6 mm
Sytec Pro-Line in-line fuel filter - 8 mmSytec Pro-Line in-line fuel filter - 6 mm

Sytec Pro-Line in-line fuel filter - 8 mm

PRO805
Add to cart

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

  • More
  • Related Products

Sytec Pro-Line in-line fuel filter - 8 mm
Sytec Pro-Line in-line fuel filter - 8 mm
Sytec Pro-Line in-line fuel filter - 8 mm

Replacement elements for Sytec in-line fuel filter

PRO896
Add to cart

3 replacement elements for the Sytec Pro-Line in-line fuel filter.

Come complete with new rubber seals.

These elements fit our PRO804 and PRO805 Sytec in-line fuel filters.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

 

 

 

 

Replacement elements for Sytec in-line fuel filter

  • More
  • Related Products

Replacement elements for Sytec in-line fuel filter
Replacement elements for Sytec in-line fuel filter
Replacement elements for Sytec in-line fuel filter

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

flexoid5xa4
Add to cart

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

  • More
  • Related Products

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Carburettor Jet Gauges

jet sizer
Add to cart

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

  • More
  • Related Products

Carburettor Jet Gauges
Carburettor Jet Gauges
Carburettor Jet Gauges
Carburettor Jet Gauges
Carburettor Jet Gauges

Jet size gauge 0.5 to 1.5 mm

JSG01
Add to cart

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

Jet size gauge 0.5 to 1.5 mm

  • More
  • Related Products

Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm

54-Piece Jet Drill Set

JDK01
Add to cart

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

  • More
  • Related Products

54-Piece Jet Drill Set
54-Piece Jet Drill Set
54-Piece Jet Drill Set

Gauge Conversion Chart to Inches & MM

Gauge

Inch

Millimeter

80

0.0135

0.343

79

0.0145

0.368

78

0.0160

0.406

77

0.0180

0.457

76

0.0200

0.508

75

0.0210

0.533

74

0.0225

0.572

73

0.0240

0.610

72

0.0250

0.635

71

0.0260

0.660

70

0.0280

0.711

69

0.0292

0.742

68

0.0310

0.787

67

0.0320

0.813

66

0.0330

0.838

65

0.0350

0.889

64

0.3600

0.914

63

0.0370

0.940

62

0.0380

0.965

61

0.0390

0.991

16-Piece Jet Reamer Set

JET REAMER
Add to cart

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

  • More
  • Related Products

16-Piece Jet Reamer Set
16-Piece Jet Reamer Set
16-Piece Jet Reamer Set

Gunson Colortune See Through Spark Plug Kit

G4074
Add to cart

Gunson Colortune See Through Spark Plug Kit

  • More
  • Related Products

Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit

Dellorto Carburatori Sticker - Large

DD0906
Add to cart

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 9 x 3 cm (3.54 x 1.2 inches).

This is Number 1 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Large

  • More
  • Related Products

Dellorto Carburatori Sticker - Large
Dellorto Carburatori Sticker - Large
Dellorto Carburatori Sticker - Large

Dellorto Carburatori Sticker - Medium

DD0909
Add to cart

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 8 x 4 cm (3.1 x 1.55 inches).

This is Number 2 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Medium

  • More
  • Related Products

Dellorto Carburatori Sticker - Medium
Dellorto Carburatori Sticker - Medium
Dellorto Carburatori Sticker - Medium

Dellorto Carburatori Sticker - Small - Low

DD0905
Add to cart

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 6 x 2 cm (2.4 x 0.8 inches).

This is Number 3 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Small - Low

  • More
  • Related Products

Dellorto Carburatori Sticker - Small - Low
Dellorto Carburatori Sticker - Small - Low
Dellorto Carburatori Sticker - Small - Low

Dellorto Carburatori Sew-On Patch

Patch
Add to cart

Official issue sew-on patch with the Dellorto logo and Italian flag "tricolore" colors.

Measures 12 x 6.5 cm (4.7 x 2.6 inches).

Elaborately embroidered.

Dellorto Carburatori Sew-On Patch

  • More
  • Related Products

Dellorto Carburatori Sew-On Patch
Dellorto Carburatori Sew-On Patch
Dellorto Carburatori Sew-On Patch

10 ml Loctite 542 Thread Sealant

LOCTITE542-10ML
Add to cart

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant

  • More
  • Related Products

10 ml Loctite 542 Thread Sealant
10 ml Loctite 542 Thread Sealant
10 ml Loctite 542 Thread Sealant

5 ml Loctite 243 Thread Locker

LOCTITE243-5ML
Add to cart

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000

5 ml Loctite 243 Thread Locker

  • More
  • Related Products

5 ml Loctite 243 Thread Locker
5 ml Loctite 243 Thread Locker
5 ml Loctite 243 Thread Locker

Gunson Digital Exhaust Gas and CO Tester - G4125

G4125
Add to cart

Gunson Digital Exhaust Gas and CO Tester - G4125

  • More
  • Related Products

Gunson Digital Exhaust Gas and CO Tester - G4125
Gunson Digital Exhaust Gas and CO Tester
Gunson Digital Exhaust Gas and CO Tester - G4125

!