Ac Ace Bristol

AC Ace Bristol Carburetor Service Kits
AC Ace Bristol Carburetor Service Kits

AC Ace Bristol Carburetor Service Kits.

On this page you will find the service kits for the Bristol-engined AC Ace that we can supply.

If the service kit that you're looking for isn't listed yet, please contact us by email as chances are that we can help you anyway.

AC Ace Bristol Carburetor Service Kits

Service Kit for Solex B32 PBI 6 carburetors for Bristol Engines

SKT14
Add to cart

This is a factory-original service kit for the Solex / Zenith B32 PBI 6 carburetor as used on the Bristol D-series engines.

These engines were used, amongst others, in the following cars:

  • AC Ace Bristol
  • AC Greyhound Bristol

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Contains the parts to service 1 carburettor.

Consists of the following parts:

  • All required gaskets
  • Pump diaphragm
  • Needle Valve
  • All required washers

Service Kit for Solex B32 PBI 6 carburetors for Bristol Engines

  • More
  • Related Products

Service Kit for Solex B32 PBI 6 carburetors for Bristol Engines
Service Kit for Solex B32 PBI 6 carburetors for Bristol Engines
Service Kit for Solex B32 PBI 6 carburetors for Bristol Engines

(25) Emulsion Tube Holder for Solex PBI carburetors

CCRPBIEMULSION
Add to cart

Emulsion tube holder for the Solex 32 PBI series carburetors.

Please note that there were often undocumented changes to these carburetors so please check carefully if these holders would suit your carburettor(s).

The overall length of this emulsion tube is 43.25 mm.

Required quantity per carburettor: 1

This is item number 25 in the drawing of the PBI.

(25) Emulsion Tube Holder for Solex PBI carburetors

  • More
  • Related Products

(25) Emulsion Tube Holder for Solex PBI carburetors
(25) Emulsion Tube Holder for Solex PBI carburetors
(25) Emulsion Tube Holder for Solex PBI carburetors
(25) Emulsion Tube Holder for Solex PBI carburetors
(25) Emulsion Tube Holder for Solex PBI carburetors

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

flexoid5xa4
Add to cart

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

  • More
  • Related Products

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Gates textile covered fuel line hose with 8 mm inner diameter

gatestextiel8mm
Add to cart

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 0.5 meter.

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

  • More
  • Related Products

Gates textile covered fuel line hose with 8 mm inner diameter
Gates textile covered fuel line hose with 8 mm inner diameter
Gates textile covered fuel line hose with 8 mm inner diameter

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee11-13
Add to cart

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

  • More
  • Related Products

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Sytec Fuel Line One Way Valve

OWV
Add to cart

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

  • More
  • Related Products

Sytec One Way Fuel Line Valve
Sytec One Way Fuel Line Valve
Sytec One Way Fuel Line Valve

Carburettor Jet Gauges

jet sizer
Add to cart

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

  • More
  • Related Products

Carburettor Jet Gauges
Carburettor Jet Gauges
Carburettor Jet Gauges
Carburettor Jet Gauges
Carburettor Jet Gauges

Jet size gauge 0.5 to 1.5 mm

JSG01
Add to cart

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

Jet size gauge 0.5 to 1.5 mm

  • More
  • Related Products

Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm

54-Piece Jet Drill Set

JDK01
Add to cart

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

  • More
  • Related Products

54-Piece Jet Drill Set
54-Piece Jet Drill Set
54-Piece Jet Drill Set

Gauge Conversion Chart to Inches & MM

Gauge

Inch

Millimeter

80

0.0135

0.343

79

0.0145

0.368

78

0.0160

0.406

77

0.0180

0.457

76

0.0200

0.508

75

0.0210

0.533

74

0.0225

0.572

73

0.0240

0.610

72

0.0250

0.635

71

0.0260

0.660

70

0.0280

0.711

69

0.0292

0.742

68

0.0310

0.787

67

0.0320

0.813

66

0.0330

0.838

65

0.0350

0.889

64

0.3600

0.914

63

0.0370

0.940

62

0.0380

0.965

61

0.0390

0.991

16-Piece Jet Reamer Set

JET REAMER
Add to cart

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

  • More
  • Related Products

16-Piece Jet Reamer Set
16-Piece Jet Reamer Set
16-Piece Jet Reamer Set

Gunson Colortune See Through Spark Plug Kit

G4074
Add to cart

Gunson Colortune See Through Spark Plug Kit

  • More
  • Related Products

Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit

Gunson Carbalancer Carburetor Synchronizing Tool - G4053

G4053
Add to cart

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Article Number: G4053

Gunson Carbalancer Carburetor Synchronizing Tool - G4053

  • More
  • Related Products

Gunson Carbalancer Carburetor Synchronizing Tool - G4053
Gunson Carbalancer Carburetor Synchronizing Tool
Gunson Carbalancer Carburetor Synchronizing Tool - G4053
Gunson Carbalancer Carburetor Synchronizing Tool
Gunson Carbalancer Carburetor Synchronizing Tool - G4053
Gunson Carbalancer Carburetor Synchronizing Tool
Gunson Carbalancer Carburetor Synchronizing Tool - G4053

10 ml Loctite 542 Thread Sealant

LOCTITE542-10ML
Add to cart

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant

  • More
  • Related Products

10 ml Loctite 542 Thread Sealant
10 ml Loctite 542 Thread Sealant
10 ml Loctite 542 Thread Sealant

5 ml Loctite 243 Thread Locker

LOCTITE243-5ML
Add to cart

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000

5 ml Loctite 243 Thread Locker

  • More
  • Related Products

5 ml Loctite 243 Thread Locker
5 ml Loctite 243 Thread Locker
5 ml Loctite 243 Thread Locker

Gunson Digital Exhaust Gas and CO Tester - G4125

G4125
Add to cart

Gunson Digital Exhaust Gas and CO Tester - G4125

  • More
  • Related Products

Gunson Digital Exhaust Gas and CO Tester - G4125
Gunson Digital Exhaust Gas and CO Tester
Gunson Digital Exhaust Gas and CO Tester - G4125

!