Mercedes Benz

Mercedes-Benz Carburetor Service Kits
Mercedes-Benz Carburetor Service Kits

Mercedes-Benz Carburetor Service Kits.

On this page you will find the carburettor rebuild kits that we can supply for the various Mercedes models.

If your model isn't listed yet, please contact us by email as there is a good chance that we can help you anyway.

Our Contact Page can be found HERE.

Mercedes-Benz Carburetor Service Kits

Mercedes Benz 190SL 2 x Weber DCOE40 Conversion Kit

WCPME201
Add to cart

If you own a Mercedes 190SL, you are probably very well aware of the fact that the original Solex PHH carburetors are reaching the end of their working life.

Wear and tear to the shafts, housings, butterfly discs etc cause irradical running, rough idle, performance and power loss and loss of driveability.

Second hand prices are running in the thousands by now and those carburettors are just as old and worn as the ones you already have...

"Off the shelf solutions" were not available so far but that has changed now!

As per today, we can offer you a 2 x Weber 40DCOE conversion kit that is tailor-made for the 190 SL!

Superbly crafted in the UK, this kit includes brand new, genuine, Weber 40DCOE carburettors expertly calibrated and jetted to suit the Mercedes so little or no additional calibration will be required (depending on the condition of your engine of course).

The kit also includes superb, CNC machined, anodized air box adapters, replacement rubber mounting blocks, plus the linkage rods, gaskets, studs etc.

We dare to say that this is the finest MB 190SL DCOE kit available on the market today.

Please note:
Barely introduced, there is already a waiting list for these kits and consequently there is a lead time of around 1 week on these kits. Please take this into account when ordering.

Mercedes Benz 190SL 2 x Weber DCOE40 Conversion Kit

  • More
  • Related Products

Mercedes Benz 190SL 2 x Weber DCOE40 Conversion Kit
Mercedes Benz 190SL 2 x Weber DCOE40 Conversion Kit
Mercedes Benz 190SL 2 x Weber DCOE40 Conversion Kit

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

FR4201
Add to cart

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as used on, amongst others, some Mercedes Benz models.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • Copper washer
  • Aluminum washer
  • Fiber Washer

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

  • More
  • Related Products

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes

FR6922
Add to cart

Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors as used on, amongst others, the following cars:

  • BMW 1502
  • BMW 1602
  • BMW 1800
  • BMW 1802
  • BMW 2000
  • BMW 2002
  • BMW 518
  • Mercedes Benz 200
  • Mercedes Benz 230 (W110)
  • Mercedes Benz L 601 (208)
  • Mercedes Benz L 208
  • Mercedes Benz L 308
  • Mercedes Benz L 409

Contains, amongst other, the following parts to service 1 carburettor:

  • 3 Pump Diaphragms
  • Complete needle valve
  • 3 Float chamber gaskets
  • 2 Base gaskets
  • Various copper washers
  • Various aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Article Number: FR6922

Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes

  • More
  • Related Products

Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes
Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes
Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes
Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes - FR6922
Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 170 S

FR8683
Add to cart

Service kit for the Solex 32 PICB and 34 PICB carburetors as used, amongst others, on the Mercedes-Benz 170 S.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various fiber washers
  • Various pump diaphragms
  • Needle valve - size 2.0

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Carburetor City Article Number: FR8683

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 170 S - FR8683

  • More
  • Related Products

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 170 S - FR8683
Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 170 S
Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 170 S - FR8683

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 180 a, b & c

FR8683
Add to cart

Service kit for the Solex 32 PICB and 34 PICB carburetors as used, amongst others, on the Mercedes-Benz 180 a, b and c.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various fiber washers
  • Various pump diaphragms
  • Needle valve - size 2.0

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Carburetor City Article Number: FR8683

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 180 a, b & c - FR8683

  • More
  • Related Products

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 180 a, b & c - FR8683
Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 180 a, b & c
Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 180 a, b & c - FR8683

Service Kit for Solex 32 PAITA carburetors for Mercedes 190

FR4855
Add to cart

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1956 - 1959 Mercedes Benz 190

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Carburetor City Article Number: FR4855

Service Kit for Solex 32 PAITA carburetors for Mercedes 190 - FR4855

  • More
  • Related Products

Service Kit for Solex 32 PAITA carburetors for Mercedes 190 - FR4855
Service Kit for Solex 32 PAITA carburetors for Mercedes 190
Service Kit for Solex 32 PAITA carburetors for Mercedes 190 - FR4855

Rebuild Kit for Stromberg 175 TCDT carburetors for Mercedes 190 W201

PMS159
Add to cart

Service kit for the Stromberg 175 TCDT, 175 DCT and 175CDUS carburetors as fitted to, amongst others, the:

  • Mercedes Benz 190 W201

Please note that these varieties of the Stromberg / Solex 175CD were exclusively used by Mercedes-Benz and Volvo.

Referring to the drawing, this set contains the following parts to service 1 carburetor:

  • 1 x Choke Housing Gasket - Number 15
  • 1 x Viton (Rubber) O-Ring for Choke Housing - Number 19
  • 1 x Needle Valve Size 225 (see note below) - Number 39
  • 1 x Aluminum Washer for Needle Valve - Number 40
  • 1 x Throttle Slide Diaphragm - Number 48
  • 1 x Paper Float Chamber Gasket - Number 49
  • 1 x Top Cover Gasket - Number 64
  • 1 x Manifold Gasket - NOT indicated in the Drawing

Please note!
The basis of the carburetor is the Stromberg 175CD as produced in the United Kingdom (England / Great Britain).

This version here, the 175 TCDT, was produced in Germany for Volvo and Mercedes-Benz and differs from the British versions.

The, scarcely available, literature remains very vague and also the carburettors themselves do not always indicate the exact type.

The German versions often carry the Pierburg or Deutsche Vergaser GMBH names on the top cover and in some cases also "Made in Germany".

However... also of this variety there are at least two versions to be found...

The set that we offer here is suitable for the versions with the round top cover with gasket without eyelets.
So, as indicated in the drawing below:
Rebuild Kit for Stromberg 175 TCDT carburetors for Mercedes 190 W201
Another major difference can be found in the needle valves as illustrated below:

Rebuild Kit for Stromberg 175 TCDT carburetors for Mercedes 190 W201

Basically (!) PM8011 is the needle valve as used in the German versions. This is the valve with the FINE thread, as visible in the photo.

If your carburetor is equipped with needle valve PM8016, with COARSE thread, then we would like to refer your to our department for the regular Stromberg 175CD rebuild kits that you will find HERE.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 TCDT carburetors for Mercedes 190 W201

  • More
  • Related Products

Rebuild Kit for Stromberg 175 TCDT carburetors for Mercedes 190 W201
Rebuild Kit for Stromberg 175 TCDT carburetors for Mercedes 190 W201
Rebuild Kit for Stromberg 175 TCDT carburetors for Mercedes 190 W201

Service Kit for Solex 32 PAITA carburetors for Mercedes 190 b

FR4855
Add to cart

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1959 - 1961 Mercedes Benz 190 b

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Carburetor City Article Number: FR4855

Service Kit for Solex 32 PAITA carburetors for Mercedes 190 b - FR4855

  • More
  • Related Products

Service Kit for Solex 32 PAITA carburetors for Mercedes 190 b - FR4855
Service Kit for Solex 32 PAITA carburetors for Mercedes 190 b
Service Kit for Solex 32 PAITA carburetors for Mercedes 190 b - FR4855

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 190 c

FR8683
Add to cart

Service kit for the Solex 32 PICB and 34 PICB carburetors as used, amongst others, on the Mercedes-Benz 190 c.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various fiber washers
  • Various pump diaphragms
  • Needle valve - size 2.0

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Carburetor City Article Number: FR8683

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 190 c - FR8683

  • More
  • Related Products

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 190 c - FR8683
Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 190 c
Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 190 c - FR8683

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W115

PMS159
Add to cart

Service kit for the Stromberg 175 CDT carburetor as fitted to, amongst others, the:

  • Mercedes Benz 200 W115

Please note that these varieties of the Stromberg / Solex 175CD were exclusively used by Mercedes-Benz and Volvo.

Referring to the drawing, this set contains the following parts to service 1 carburetor:

  • 1 x Choke Housing Gasket - Number 15
  • 1 x Viton (Rubber) O-Ring for Choke Housing - Number 19
  • 1 x Needle Valve Size 225 (see note below) - Number 39
  • 1 x Aluminum Washer for Needle Valve - Number 40
  • 1 x Throttle Slide Diaphragm - Number 48
  • 1 x Paper Float Chamber Gasket - Number 49
  • 1 x Top Cover Gasket - Number 64
  • 1 x Manifold Gasket - NOT indicated in the Drawing

Please note!
The basis of the carburetor is the Stromberg 175CD as produced in the United Kingdom (England / Great Britain).

This version here, the 175 CDT, was produced in Germany for Volvo and Mercedes-Benz and differs from the British versions.

The, scarcely available, literature remains very vague and also the carburettors themselves do not always indicate the exact type.

The German versions often carry the Pierburg or Deutsche Vergaser GMBH names on the top cover and in some cases also "Made in Germany".

However... also of this variety there are at least two versions to be found...

The set that we offer here is suitable for the versions with the round top cover with gasket without eyelets.
So, as indicated in the drawing below:
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W115
Another major difference can be found in the needle valves as illustrated below:

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W115

Basically (!) PM8011 is the needle valve as used in the German versions. This is the valve with the FINE thread, as visible in the photo.

If your carburetor is equipped with needle valve PM8016, with COARSE thread, then we would like to refer your to our department for the regular Stromberg 175CD rebuild kits that you will find HERE.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W115

  • More
  • Related Products

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W115
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W115
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W115

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W123

ECCDT175
Add to cart

Service kit for the Stromberg 175 TCDT carburetor as fitted to the:

  • Mercedes Benz 200 W123

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 225
  • Aluminum Washer for Needle Valve
  • Various rubber / Viton O-Rings
  • Fiber Washer
  • Choke Pull-Down Diaphragm

Please note that the Stromberg 175 CDT was manufactured in Germany and ONLY used by Mercedes-Benz and Volvo.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W123

  • More
  • Related Products

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W123
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W123
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W123

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W201

ECCDT175
Add to cart

Service kit for the Stromberg 175 TCDT carburetor as fitted to the:

  • Mercedes Benz 200 W201

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 225
  • Aluminum Washer for Needle Valve
  • Various rubber / Viton O-Rings
  • Fiber Washer
  • Choke Pull-Down Diaphragm

Please note that the Stromberg 175 CDT was manufactured in Germany and ONLY used by Mercedes-Benz and Volvo.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W201

  • More
  • Related Products

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W201
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W201
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W201

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 220 W111

PMI2
Add to cart

Service Kit for the Solex INAT 35-40 carburetors as used on, amongst others, the following Mercedes W111 models:

  • 1965 - 1968 6-Cilinder Mercedes-Benz 220 W111 - 2195 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Solex INAT was also produced as Zenith INAT.
The Zenith INAT can be found HERE.

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 220 W111

  • More
  • Related Products

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 220 W111
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 220 W111
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 220 W111

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 220 W111

PMI2
Add to cart

Service Kit for the Zenith INAT 35-40 carburetors as used on, amongst others, the following Mercedes W111 models:

  • 1965 - 1968 6-Cilinder Mercedes-Benz 220 W111 - 2195 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Zenith INAT was also produced as Solex INAT.
The Solex INAT can be found HERE.

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 220 W111

  • More
  • Related Products

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 220 W111
Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 220 W111
Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 220 W111

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 220 b

FR8683
Add to cart

Service kit for the Solex 32 PICB and 34 PICB carburetors as used, amongst others, on the Mercedes-Benz 220 b.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various fiber washers
  • Various pump diaphragms
  • Needle valve - size 2.0

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Carburetor City Article Number: FR8683

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 220 b - FR8683

  • More
  • Related Products

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 220 b - FR8683
Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 220 b
Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes 220 b - FR8683

Service Kit for Solex 32 PAITA carburetors for Mercedes 220 S

FR4855
Add to cart

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1956 - 1959 Mercedes Benz 220 S

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Carburetor City Article Number: FR4855

Service Kit for Solex 32 PAITA carburetors for Mercedes 220 S - FR4855

  • More
  • Related Products

Service Kit for Solex 32 PAITA carburetors for Mercedes 220 S - FR4855
Service Kit for Solex 32 PAITA carburetors for Mercedes 220 S
Service Kit for Solex 32 PAITA carburetors for Mercedes 220 S - FR4855

Service Kit for Solex 34 PAITA carburetors for Mercedes 220 Sb

FR4855
Add to cart

Service kit for the Solex 34PAITA carburetors as used on, amongst others, the:

  • post-1959 Mercedes Benz 220 Sb

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Carburetor City Article Number: FR4855

Service Kit for Solex 34 PAITA carburetors for Mercedes 220 Sb - FR4855

  • More
  • Related Products

Service Kit for Solex 34 PAITA carburetors for Mercedes 220 Sb - FR4855
Service Kit for Solex 34 PAITA carburetors for Mercedes 220 Sb
Service Kit for Solex 34 PAITA carburetors for Mercedes 220 Sb - FR4855

Rebuild Kit for Stromberg 175 CDT-V carburetors for Mercedes 220 W115

PMS159
Add to cart

Service kit for the Stromberg 175 CDTV carburetor as fitted to, amongst others, the:

  • Mercedes Benz 220 W115

Please note that these varieties of the Stromberg / Solex 175CD were exclusively used by Mercedes-Benz and Volvo.

Referring to the drawing, this set contains the following parts to service 1 carburetor:

  • 1 x Choke Housing Gasket - Number 15
  • 1 x Viton (Rubber) O-Ring for Choke Housing - Number 19
  • 1 x Needle Valve Size 225 (see note below) - Number 39
  • 1 x Aluminum Washer for Needle Valve - Number 40
  • 1 x Throttle Slide Diaphragm - Number 48
  • 1 x Paper Float Chamber Gasket - Number 49
  • 1 x Top Cover Gasket - Number 64
  • 1 x Manifold Gasket - NOT indicated in the Drawing

Please note!
The basis of the carburetor is the Stromberg 175CD as produced in the United Kingdom (England / Great Britain).

This version here, the 175 CDT-V, was produced in Germany for Volvo and Mercedes-Benz and differs from the British versions.

The, scarcely available, literature remains very vague and also the carburettors themselves do not always indicate the exact type.

The German versions often carry the Pierburg or Deutsche Vergaser GMBH names on the top cover and in some cases also "Made in Germany".

However... also of this variety there are at least two versions to be found...

The set that we offer here is suitable for the versions with the round top cover with gasket without eyelets.
So, as indicated in the drawing below:
Rebuild Kit for Stromberg 175 CDT-V carburetors for Mercedes 220 W115
Another major difference can be found in the needle valves as illustrated below:

Rebuild Kit for Stromberg 175 CDT-V carburetors for Mercedes 220 W115

Basically (!) PM8011 is the needle valve as used in the German versions. This is the valve with the FINE thread, as visible in the photo.

If your carburetor is equipped with needle valve PM8016, with COARSE thread, then we would like to refer your to our department for the regular Stromberg 175CD rebuild kits that you will find HERE.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CDT-V carburetors for Mercedes 220 W115

  • More
  • Related Products

Rebuild Kit for Stromberg 175 CDT-V carburetors for Mercedes 220 W115
Rebuild Kit for Stromberg 175 CDT-V carburetors for Mercedes 220 W115
Rebuild Kit for Stromberg 175 CDT-V carburetors for Mercedes 220 W115

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W111

PMI2
Add to cart

Service Kit for the Solex INAT 35-40 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1965 - 1968 6-Cilinder Mercedes-Benz 230 W111 - 2295 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Solex INAT was also produced as Zenith INAT.
The Zenith INAT can be found HERE.

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W111

  • More
  • Related Products

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W111
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W111
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W111

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W110

PMI2
Add to cart

Service Kit for the Solex INAT 35-40 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1965 - 1968 6-Cilinder Mercedes-Benz 230 W110 - 2303 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Solex INAT was also produced as Zenith INAT.
The Zenith INAT can be found HERE.

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W110

  • More
  • Related Products

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W110
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W110
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W110

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 230 W110

PMI2
Add to cart

Service Kit for the Zenith INAT 35-40 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1965 - 1968 6-Cilinder Mercedes-Benz 230 W110 - 2303 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Zenith INAT was also produced as Solex INAT.
The Solex INAT can be found HERE.

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 230 W110

  • More
  • Related Products

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 230 W110
Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 230 W110
Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 230 W110

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 230 W111

PMI2
Add to cart

Service Kit for the Zenith INAT 35-40 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1965 - 1968 6-Cilinder Mercedes-Benz 230 W111 - 2295 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Zenith INAT was also produced as Solex INAT.
The Solex INAT can be found HERE.

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 230 W111

  • More
  • Related Products

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 230 W111
Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 230 W111
Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 230 W111

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 230/4 W115

ECCDT175
Add to cart

Service kit for the Stromberg 175 TCDT carburetor as fitted to the:

  • Mercedes Benz 230/4 W115

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 225
  • Aluminum Washer for Needle Valve
  • Various rubber / Viton O-Rings
  • Fiber Washer
  • Choke Pull-Down Diaphragm

Please note that the Stromberg 175 CDT was manufactured in Germany and ONLY used by Mercedes-Benz and Volvo.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 230/4 W115

  • More
  • Related Products

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 230/4 W115
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 230/4 W115
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 230/4 W115

Rebuild Kit for Stromberg 175 CDT-U carburetors for Mercedes 230 W115

PMS159
Add to cart

Service kit for the Stromberg 175 CDTU carburetor as fitted to, amongst others, the:

  • Mercedes Benz 230 W115

Please note that these varieties of the Stromberg / Solex 175CD were exclusively used by Mercedes-Benz and Volvo.

Referring to the drawing, this set contains the following parts to service 1 carburetor:

  • 1 x Choke Housing Gasket - Number 15
  • 1 x Viton (Rubber) O-Ring for Choke Housing - Number 19
  • 1 x Needle Valve Size 225 (see note below) - Number 39
  • 1 x Aluminum Washer for Needle Valve - Number 40
  • 1 x Throttle Slide Diaphragm - Number 48
  • 1 x Paper Float Chamber Gasket - Number 49
  • 1 x Top Cover Gasket - Number 64
  • 1 x Manifold Gasket - NOT indicated in the Drawing

Please note!
The basis of the carburetor is the Stromberg 175CD as produced in the United Kingdom (England / Great Britain).

This version here, the 175 CDTU, was produced in Germany for Volvo and Mercedes-Benz and differs from the British versions.

The, scarcely available, literature remains very vague and also the carburettors themselves do not always indicate the exact type.

The German versions often carry the Pierburg or Deutsche Vergaser GMBH names on the top cover and in some cases also "Made in Germany".

However... also of this variety there are at least two versions to be found...

The set that we offer here is suitable for the versions with the round top cover with gasket without eyelets.
So, as indicated in the drawing below:
Rebuild Kit for Stromberg 175 CDT-U carburetors for Mercedes 230 W115
Another major difference can be found in the needle valves as illustrated below:

Rebuild Kit for Stromberg 175 CDT-U carburetors for Mercedes 230 W115

Basically (!) PM8011 is the needle valve as used in the German versions. This is the valve with the FINE thread, as visible in the photo.

If your carburetor is equipped with needle valve PM8016, with COARSE thread, then we would like to refer your to our department for the regular Stromberg 175CD rebuild kits that you will find HERE.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CDT-U carburetors for Mercedes 230 W115

  • More
  • Related Products

Rebuild Kit for Stromberg 175 CDT-U carburetors for Mercedes 230 W115
Rebuild Kit for Stromberg 175 CDT-U carburetors for Mercedes 230 W115
Rebuild Kit for Stromberg 175 CDT-U carburetors for Mercedes 230 W115

Service Kit for Pierburg 4A1 32-44/54 carburetors for Mercedes Benz 250

PMI4
Add to cart

Service kit for the Pierburg 4 A 1 32-44/54 carburetors as used on, amongst others, the:

  • 1978 - 1985 Mercedes Benz 250 W123

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • Various gaskets
  • Pump Jet diaphragm
  • Needle Valve needle
  • Various required rubber (Viton) o-rings

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 4A1 32-44/54 carburetors for Mercedes Benz 250

  • More
  • Related Products

Service Kit for Pierburg 4A1 32-44/54 carburetors for Mercedes Benz 250
Service Kit for Pierburg 4A1 32-44/54 carburetors for Mercedes Benz 250
Service Kit for Pierburg 4A1 32-44/54 carburetors for Mercedes Benz 250

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 250 W114

PMI2
Add to cart

Service Kit for the Solex INAT 35-40 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1965 - 1968 Mercedes-Benz 250 W114 - 2496 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Solex INAT was also produced as Zenith INAT.
The Zenith INAT can be found HERE.

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 250 W114

  • More
  • Related Products

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 250 W114
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 250 W114
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 250 W114

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 250 W114

PMI2
Add to cart

Service Kit for the Zenith INAT 35-40 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1965 - 1968 Mercedes-Benz 250 W114 - 2496 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Zenith INAT was also produced as Solex INAT.
The Solex INAT can be found HERE.

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 250 W114

  • More
  • Related Products

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 250 W114
Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 250 W114
Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 250 W114

Service Kit for Solex INAT 35-40 / 42 carburetors for Mercedes-Benz 250/8 Coupe W114

PMI2
Add to cart

Service Kit for the Solex INAT 35-40/42 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1968 - 1976 Mercedes-Benz 250/8 Coupé W114 - 2496 cc
  • 1968 - 1976 Mercedes-Benz 250/8 Coupé W114 - 2778 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Solex INAT was also produced as Zenith INAT.
The Zenith INAT can be found HERE.

Service Kit for Solex INAT 35-40 / 42 carburetors for Mercedes-Benz 250/8 Coupe W114

  • More
  • Related Products

Service Kit for Solex INAT 35-40 / 42 carburetors for Mercedes-Benz 250/8 Coupe W114
Service Kit for Solex INAT 35-40 / 42 carburetors for Mercedes-Benz 250/8 Coupe W114
Service Kit for Solex INAT 35-40 / 42 carburetors for Mercedes-Benz 250/8 Coupe W114

Service Kit for Zenith INAT 35-40 / 42 carburetors for Mercedes-Benz 250/8 Coupe W114

PMI2
Add to cart

Service Kit for the Zenith INAT 35-40/42 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1968 - 1976 Mercedes-Benz 250/8 Coupé W114 - 2496 cc
  • 1968 - 1976 Mercedes-Benz 250/8 Coupé W114 - 2778 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Zenith INAT was also produced as Solex INAT.
The Solex INAT can be found HERE.

Service Kit for Zenith INAT 35-40 / 42 carburetors for Mercedes-Benz 250/8 Coupe W114

  • More
  • Related Products

Service Kit for Zenith INAT 35-40 / 42 carburetors for Mercedes-Benz 250/8 Coupe W114
Service Kit for Zenith INAT 35-40 / 42 carburetors for Mercedes-Benz 250/8 Coupe W114
Service Kit for Zenith INAT 35-40 / 42 carburetors for Mercedes-Benz 250/8 Coupe W114

Service Kit for Pierburg 4A1 32-54 carburetors for Mercedes Benz 280

PMI4
Add to cart

Service kit for the Pierburg 4 A 1 32-54 carburetors as used on, amongst others, the:

  • 1972 - 1976 Mercedes Benz 280 W114
  • 1975 - 1980 Mercedes Benz 280 W116
  • 1975 - 1986 Mercedes Benz 280 W123

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • Various gaskets
  • Pump Jet diaphragm
  • Needle Valve needle
  • Various required rubber (Viton) o-rings

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 4A1 32-54 carburetors for Mercedes Benz 280

  • More
  • Related Products

Service Kit for Pierburg 4A1 32-54 carburetors for Mercedes Benz 280
Service Kit for Pierburg 4A1 32-54 carburetors for Mercedes Benz 280
Service Kit for Pierburg 4A1 32-54 carburetors for Mercedes Benz 280

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 280 S W110

PMI2
Add to cart

Service Kit for the Solex INAT 35-40 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1968 - 1972 Mercedes-Benz 280S W110 - 2778 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Solex INAT was also produced as Zenith INAT.
The Zenith INAT can be found HERE.

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 280 S W110

  • More
  • Related Products

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 280 S W110
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 280 S W110
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 280 S W110

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 280 S W110

PMI2
Add to cart

Service Kit for the Zenith INAT 35-40 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1968 - 1972 Mercedes-Benz 280S W110 - 2778 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Zenith INAT was also produced as Solex INAT.
The Solex INAT can be found HERE.

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 280 S W110

  • More
  • Related Products

Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 280 S W110
Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 280 S W110
Service Kit for Zenith INAT 35-40 carburetors for Mercedes-Benz 280 S W110

Service Kit for Solex 32 PAITA carburetors for Mercedes 300 b

FR4855
Add to cart

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1954 - 1956 Mercedes Benz 300 b

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Carburetor City Article Number: FR4855

Service Kit for Solex 32 PAITA carburetors for Mercedes 300 b - FR4855

  • More
  • Related Products

Service Kit for Solex 32 PAITA carburetors for Mercedes 300 b - FR4855
Service Kit for Solex 32 PAITA carburetors for Mercedes 300 b - FR4855
Service Kit for Solex 32 PAITA carburetors for Mercedes 300 b - FR4855

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes O319 and L319

FR8683
Add to cart

Service kit for the Solex 32 PICB and 34 PICB carburetors as used, amongst others, on the Mercedes-Benz O 319 and L 319.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various fiber washers
  • Various pump diaphragms
  • Needle valve - size 2.0

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Carburetor City Article Number: FR8683

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes O319 and L319 - FR8683

  • More
  • Related Products

Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes O319 and L319 - FR8683
Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes O319 and L319
Rebuild Kit for Solex 32 and 34 PICB Carburetors for Mercedes O319 and L319 - FR8683

Rebuild Kit for Solex PICB Carburetors for Mercedes-Benz 408 T2 Transporter

ECSKT18
Add to cart

Service kit for the Solex 32 PICB and 34 PICB carburetors as used on, amongst others, the:

  • Mercedes Benz 408 T2 Transporter

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various copper washers
  • Various fiber washers
  • Various pump diaphragms
  • Needle valve - size 1.5

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Carburetor City Article Number: ECSKT18

Rebuild Kit for Solex PICB Carburetors for Mercedes-Benz 408 T2 Transporter - ECSKT18

  • More
  • Related Products

Rebuild Kit for Solex PICB Carburetors for Mercedes-Benz 408 T2 Transporter - ECSKT18
Rebuild Kit for Solex PICB Carburetors for Mercedes-Benz 408 T2 Transporter
Rebuild Kit for Solex PICB Carburetors for Mercedes-Benz 408 T2 Transporter - ECSKT18

Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L410 T1 Transporter

PMS170
Add to cart

Rebuild kit for the Pierburg 36 1B3 carburetor as used on the:

  • 2307 cc Mercedes-Benz L410 T1 Transporter

This kit contains, amongst other, the following parts to service 1 carburettor:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L410 T1 Transporter

  • More
  • Related Products

Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L410 T1 Transporter
Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L410 T1 Transporter
Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L410 T1 Transporter

Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L601 T1 Transporter

PMS170
Add to cart

Rebuild kit for the Pierburg 36 1B3 carburetor as used on the:

  • 2307 cc Mercedes-Benz L601 T1 Transporter

This kit contains, amongst other, the following parts to service 1 carburettor:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L601 T1 Transporter

  • More
  • Related Products

Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L601 T1 Transporter
Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L601 T1 Transporter
Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L601 T1 Transporter

Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L602 T1 Transporter

PMS170
Add to cart

Rebuild kit for the Pierburg 36 1B3 carburetor as used on the:

  • 2307 cc Mercedes-Benz L602 T1 Transporter

This kit contains, amongst other, the following parts to service 1 carburettor:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L602 T1 Transporter

  • More
  • Related Products

Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L602 T1 Transporter
Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L602 T1 Transporter
Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L602 T1 Transporter

Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L611 T1 Transporter

PMS170
Add to cart

Rebuild kit for the Pierburg 36 1B3 carburetor as used on the:

  • 2307 cc Mercedes-Benz L611 Transporter

This kit contains, amongst other, the following parts to service 1 carburettor:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L611 T1 Transporter

  • More
  • Related Products

Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L611 T1 Transporter
Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L611 T1 Transporter
Rebuild Kit for Pierburg 36 1B3 carburetors for Mercedes L611 T1 Transporter

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz TN1 Transporter

PMS210
Add to cart

Rebuild Kit for the Solex and Pierburg 36-40 PDSI carburetors as used on, amongst others, the following Mercedes-Benz TN1 Transporters:

  • Mercedes Benz L 601 - 2307 cc - 1972 - 1982
  • Mercedes Benz L 208 - 2307 cc - 1972 - 1982
  • Mercedes Benz L 308 - 2307 cc - 1972 - 1982
  • Mercedes Benz L 409 - 2307 cc - 1972 - 1982

Contains, amongst other, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve - size 200
  • Float chamber gasket
  • Choke gasket & O-Ring
  • Copper washer

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Carburetor City Article Number: PMS210

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz TN1 Transporter - PMS210

  • More
  • Related Products

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz TN1 Transporter - PMS210
Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz TN1 Transporter - PMS210
Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz TN1 Transporter - PMS210

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz W110

PMS210
Add to cart

Service Kit for the Solex and Pierburg 36-40 PDSI carburetors as used on, amongst others, the following Mercedes W110 models:

  • Mercedes Benz 200 W110 - 1998 cc - 1965 - 1968
  • Mercedes Benz 230 W110 - 6 cylinder - 2303 cc - 1965 - 1967

Contains, amongst other, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve - size 200
  • Float chamber gasket
  • Choke gasket & O-Ring
  • Copper washer

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Carburetor City Article Number: PMS210

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz W110 - PMS210

  • More
  • Related Products

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz W110 - PMS210
Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz W110 - PMS210
Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz W110 - PMS210

Replacement Diaphragm for Stromberg 175 CD carburetors

PM10784
Add to cart

Replacement Diaphragm for the Stromberg 175 CD carburetors.

High quality, precision moulded, replacement diaphragm to fit the following variations of the 175 CD:

  • Stromberg 175 CD 2S
  • Stromberg 175 CD 2SE
  • Stromberg 175 CD 2SET
  • Stromberg 175 CD 3
  • Stromberg 175 CD 3-5
  • Stromberg 175 CD S
  • Stromberg 175 CD SE
  • Stromberg 175 CD SEV
  • Stromberg 175 CD SEVX
  • Stromberg 175 CD T
  • Stromberg 175 TCDT

This is a Carburetor City diaphragm of excellent Italian manufacture.

Replacement Diaphragm for Stromberg 175 CD carburetors

  • More
  • Related Products

Replacement Diaphragm for Stromberg 175 CD carburetors
Replacement Diaphragm for Stromberg 175 CD carburetors
Replacement Diaphragm for Stromberg 175 CD carburetors

Special Tool for Stromberg 175 CD Carburetors

STROMBERGTOOL
Add to cart

Special Tool for tuning the Stromberg 175 CD carburetors.

A vital tool for both the DIY mechanic as well as professionals!

Special Tool for Stromberg 175 CD Carburetors

  • More
  • Related Products

Special Tool for Stromberg 175 CD Carburetors
Special Tool for Stromberg 175 CD Carburetors
Special Tool for Stromberg 175 CD Carburetors

Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors

PX300175CD
Add to cart

This is the Pipercross PX300 air filter system for 1 Stromberg 175 CD carburetor.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Stromberg 175CD series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

Base plate ONLY US$ 24.95
Filterelement ONLY US$ 64.95
Total US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors

  • More
  • Related Products

Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors
Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors
Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors
Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors
Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors
Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors
Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors

Synchrometer airflow meter for carburetors

SYNCHRONOMETER
Add to cart

Synchrometer airflow meter for various carburetors.

Pushes into the trumpet / ram pipe / velocity stack or throat to measure the airflow to enable you to balance multiple carburettors.

  • Instructions included
  • The original genuine high quality German made product
  • Can be used for all Weber DCOE and IDF and Dellorto DHLA, DRLA carbs with round intakes or trumpets
  • Can also be used with motorcycle carburetors with round intakes

Total length of unit 121mm

Rubber cone dimensions:
Small end diameter 40mm
Large end diameter 55mm
Length of cone 36mm

Synchrometer airflow meter for carburetors

  • More
  • Related Products

Synchrometer airflow meter for carburetors
Synchrometer airflow meter for Dellorto DHLA DRLA and Weber DCOE and IDF carburettors
Synchrometer airflow meter for carburetors

Synchrometer Adapter for Solex and Zenith INAT Carburetors

9800101700
Add to cart

Synchrometer adapter to suit Solex INAT and Zenith INAT carburettors.

Internal diameter: 135 mm.

 

 

 

 

 

Synchrometer Adapter for Solex and Zenith INAT Carburetors

  • More
  • Related Products

Synchrometer Adapter for Solex and Zenith INAT Carburetors
Synchrometer Adapter for Solex and Zenith INAT Carburetors
Synchrometer Adapter for Solex and Zenith INAT Carburetors

Gates textile covered fuel line hose with 6 mm inner diameter

gatestextiel6mm
Add to cart

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 6 mm inner diameter and 11 mm outer diameter.

It is sold in lengths of 0.5 meter.

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on fuel systems in passenger cars.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 10 - 12 mm jubilee clips.

Gates textile covered fuel line hose with 6 mm inner diameter

  • More
  • Related Products

Gates textile covered fuel line hose with 6 mm inner diameter
Gates textile covered fuel line hose with 6 mm inner diameter
Gates textile covered fuel line hose with 6 mm inner diameter

Cohline E10-resistant fuel line hose with 6 mm inner diameter

2134.0400
Add to cart

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an 6 mm inner diameter and 12 mm outer diameter and is therewith a nice, tight, fit onto 6 mm fuel unions.

This fuel line is DIN 73379-2a compliant.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 50 mm

This hose uses 10 - 12 mm jubilee clips.

Cohline E10-resistant fuel line hose with 6 mm inner diameter

  • More
  • Related Products

Cohline E10-resistant fuel line hose with 6 mm inner diameter
Cohline E10-resistant fuel line hose with 6 mm inner diameter
Cohline E10-resistant fuel line hose with 6 mm inner diameter
Cohline E10-resistant fuel line hose with 6 mm inner diameter
Cohline E10-resistant fuel line hose with 6 mm inner diameter

Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

2134.01.0400
Add to cart

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 6 mm inner diameter and 13.5 mm outer diameter and is therewith suitable for 6 mm fuel unions.

This fuel line is DIN 73379 Type B compliant.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 50 mm

This hose uses 12 - 14 mm jubilee clips.

Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

  • More
  • Related Products

Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding
Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding
Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

Endless Band Hose Clamp with Buckle - 5 mm wide

norm5mm
Add to cart

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allows you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

  • More
  • Related Products

Instructions on how to apply an "Endless Band & Buckle" hose clamp can be found at the bottow of this page.

Endless Band Hose Clamp with Buckle - 5 mm wide
Endless Band Hose Clamp with Buckle - 5 mm wide
Endless Band Hose Clamp with Buckle - 5 mm wide
Endless Band Hose Clamp with Buckle - 5 mm wide
Endless Band Hose Clamp with Buckle - 5 mm wide
Endless Band Hose Clamp with Buckle - 5 mm wide
Endless Band Hose Clamp with Buckle - 5 mm wide

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee10-12
Add to cart

Stainless Steel Jubilee Clip Hose Clamp for 6 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 6 mm internal diameter fuel line as well as our green "Italian Style" transparent fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 10 and 12 mm internal diameter (i.e. 10 - 12 mm external hose/line diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

  • More
  • Related Products

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp
10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp
10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee12-14
Add to cart

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 12 and 14 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

  • More
  • Related Products

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp
12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp
12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

Gates textile covered fuel line hose with 8 mm inner diameter

gatestextiel8mm
Add to cart

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 0.5 meter.

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

  • More
  • Related Products

Gates textile covered fuel line hose with 8 mm inner diameter
Gates textile covered fuel line hose with 8 mm inner diameter
Gates textile covered fuel line hose with 8 mm inner diameter

Cohline E10-resistant fuel line hose with 8 mm inner diameter

2134.0600
Add to cart

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an actual inner diameter of 7.5 mm and 13.5 mm outer diameter and therewith a nice and tight fit for 8 mm fuel unions.

This fuel line is DIN 73379-2a compliant.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 11 - 13 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter

  • More
  • Related Products

Cohline E10-resistant fuel line hose with 8 mm inner diameter
Cohline E10-resistant fuel line hose with 8 mm inner diameter
Cohline E10-resistant fuel line hose with 8 mm inner diameter
Cohline E10-resistant fuel line hose with 8 mm inner diameter
Cohline E10-resistant fuel line hose with 8 mm inner diameter

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

2134.01.0600
Add to cart

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 8 mm inner diameter and 16 mm outer diameter and is