Weber DCOM Parts

Weber DCOM carburetor parts
Weber DCOM carburetor parts

Weber DCOM carburetor parts.

On this page you will find all currently available parts for the Weber DCOM carburettors.

Click HERE for an exploded view drawing of the Weber DCOM carburetors.

The numbers in the drawing correspond with the numbers in brackets at the beginning of the article description.

Please contact us by email if the part that you are looking for is not listed yet as there's a good chance that we can help you anyway.

Weber DCOM carburetor parts

Rebuild Kit for 1 x Weber DCOM carburetor

PMW321-1
Add to cart

Rebuild kit for 1 Weber DCOM carburetor.

Contains, amongst others, the following parts to freshen-up 1 DCOM carburettor:

  • 1 Needle valve, size 150
  • 1 Pump diaphragm
  • 1 Fuel filter
  • Various gaskets as depicted
  • Various Viton (rubber) o-rings as depicted
  • Various fiber washers as depicted
  • Various aluminum washers as depicted

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for 1 x Weber DCOM carburetor

  • More
  • Related Products

Rebuild Kit for 1 x Weber DCOM carburetor
Rebuild Kit for 1 x Weber DCOM carburetor
Rebuild Kit for 1 x Weber DCOM carburetor

Rebuild Kit for 2 x Weber 40 DCOM carburetors

PMW321-2
Add to cart

Comprehensive service kit for the Weber 40 DCOM carburetors.

Contains, amongst others, the following parts to freshen-up 2 DCOM carburettors:

  • 2 Needle valves, size 150
  • 2 Pump diaphragms
  • 2 Fuel filters
  • Various gaskets as depicted
  • Various Viton (rubber) o-rings as depicted
  • Various fiber washers as depicted
  • Various aluminum washers as depicted

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for 2 x Weber 40 DCOM carburetors

  • More
  • Related Products

Rebuild Kit for 2 x Weber 40 DCOM carburetors
Rebuild Kit for 2 x Weber 40 DCOM carburetors
Rebuild Kit for 2 x Weber 40 DCOM carburetors

Rebuild Kit for 2 x Weber 40 DCOM carburetors for Alfa Romeo Alfa 75

PMW321-2
Add to cart

Comprehensive service kit for the Weber 40 DCOM 2 and 40 DCOM 3 carburetors as used on the Alfa Romeo Alfa 75 1600 and 1800.

Contains, amongst others, the following parts to freshen-up 2 DCOM carburettors:

  • 2 Needle valves, size 150
  • 2 Pump diaphragms
  • 2 Fuel filters
  • Various gaskets as depicted
  • Various Viton (rubber) o-rings as depicted
  • Various fiber washers as depicted
  • Various aluminum washers as depicted

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for 2 x Weber 40 DCOM carburetors for Alfa Romeo Alfa 75

  • More
  • Related Products

Rebuild Kit for 2 x Weber 40 DCOM carburetors for Alfa Romeo Alfa 75
Rebuild Kit for 2 x Weber 40 DCOM carburetors for Alfa Romeo Alfa 75
Rebuild Kit for 2 x Weber 40 DCOM carburetors for Alfa Romeo Alfa 75

Rebuild Kit for 2 x Weber 40 DCOM carburetors for Alfa Romeo Alfa 90

PMW321-2
Add to cart

Comprehensive service kit for the Weber 40 DCOM carburetors as used on the Alfa Romeo Alfa 90 1800 and 2000.

Contains, amongst others, the following parts to freshen-up 2 DCOM carburettors:

  • 2 Needle valves, size 150
  • 2 Pump diaphragms
  • 2 Fuel filters
  • Various gaskets as depicted
  • Various Viton (rubber) o-rings as depicted
  • Various fiber washers as depicted
  • Various aluminum washers as depicted

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for 2 x Weber 40 DCOM carburetors for Alfa Romeo Alfa 90

  • More
  • Related Products

Rebuild Kit for 2 x Weber 40 DCOM carburetors for Alfa Romeo Alfa 90
Rebuild Kit for 2 x Weber 40 DCOM carburetors for Alfa Romeo Alfa 90
Rebuild Kit for 2 x Weber 40 DCOM carburetors for Alfa Romeo Alfa 90

Rebuild Kit for 2 x Weber 40 DCOM carburetors for Citroen AX Sport

PMW321-2
Add to cart

Comprehensive service kit for the Weber 40 DCOM carburetors as used on the Citroën AX Sport.

Contains, amongst others, the following parts to freshen-up 2 DCOM carburettors:

  • 2 Needle valves, size 150
  • 2 Pump diaphragms
  • 2 Fuel filters
  • Various gaskets as depicted
  • Various Viton (rubber) o-rings as depicted
  • Various fiber washers as depicted
  • Various aluminum washers as depicted

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for 2 x Weber 40 DCOM carburetors for Citroen AX Sport

  • More
  • Related Products

Rebuild Kit for 2 x Weber 40 DCOM carburetors for Citroen AX Sport
Rebuild Kit for 2 x Weber 40 DCOM carburetors for Citroen AX Sport
Rebuild Kit for 2 x Weber 40 DCOM carburetors for Citroen AX Sport

Rebuild Kit for 2 x Weber 40 DCOM carburetors for Peugeot 205 Rally

PMW321-2
Add to cart

Comprehensive service kit for the Weber 40 DCOM carburetors as used on the Peugeot 205 Rally.

Contains, amongst others, the following parts to freshen-up 2 DCOM carburettors:

  • 2 Needle valves, size 150
  • 2 Pump diaphragms
  • 2 Fuel filters
  • Various gaskets as depicted
  • Various Viton (rubber) o-rings as depicted
  • Various fiber washers as depicted
  • Various aluminum washers as depicted

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for 2 x Weber 40 DCOM carburetors for Peugeot 205 Rally

  • More
  • Related Products

Rebuild Kit for 2 x Weber 40 DCOM carburetors for Peugeot 205 Rally
Rebuild Kit for 2 x Weber 40 DCOM carburetors for Peugeot 205 Rally
Rebuild Kit for 2 x Weber 40 DCOM carburetors for Peugeot 205 Rally

(2) Jet Cover Washer for Weber DCOM carburetors

41550.002
Add to cart

Washer for the jet cover assembly for the Weber DCOM carburetor.

Required quantity per carburettor: 1

This is item number 2 in the drawing.

 

 

(2) Jet Cover Washer for Weber DCOM carburetors

  • More
  • Related Products

(2) Jet Cover Washer for Weber DCOM carburetors
(2) Jet Cover Washer for Weber DCOM carburetors
(2) Jet Cover Washer for Weber DCOM carburetors
(2) Jet Cover Washer for Weber DCOM carburetors
(2) Jet Cover Washer for Weber DCOM carburetors

(5) Top Cover Gasket for Weber DCOM carburetors

41715.001
Add to cart

Top cover gasket for the Weber DCOM carburetor.

Fits all DCOM models.

Required quantity per carburettor: 1

This is item number 5 in the drawing.

 

(5) Top Cover Gasket for Weber DCOM carburetors

  • More
  • Related Products

(5) Top Cover Gasket for Weber DCOM carburetors
(5) Top Cover Gasket for Weber DCOM carburettors
(5) Top Cover Gasket for Weber DCOM carburetors
(5) Top Cover Gasket for Weber DCOM carburettors
(5) Top Cover Gasket for Weber DCOM carburetors

(5) Rubber Top Cover Gasket for Weber DCOM carburetors

41715.001R
Add to cart

Extra strong rubber top cover gasket for the Weber DCOM carburetor.

Fits all DCOM models.

Required quantity per carburettor: 1

This is item number 5 in the drawing.

 

(5) Rubber Top Cover Gasket for Weber DCOM carburetors

  • More
  • Related Products

(5) Rubber Top Cover Gasket for Weber DCOM carburetors
(5) Rubber Top Cover Gasket for Weber DCOM carburettors
(5) Rubber Top Cover Gasket for Weber DCOM carburetors
(5) Rubber Top Cover Gasket for Weber DCOM carburettors
(5) Rubber Top Cover Gasket for Weber DCOM carburetors

Add to cart

(9) F-type Emulsion Tube for Weber DCOM carburetors - 61450

  • More
  • Related Products

(9) F-type Emulsion Tube for Weber DCOM carburetors - 61450
(9) F-type Emulsion Tube for Weber DCOM carburetors - 61450
(9) F-type Emulsion Tube for Weber DCOM carburetors - 61450
(9) F-type Emulsion Tube for Weber DCOM carburetors - 61450
(9) F-type Emulsion Tube for Weber DCOM carburetors - 61450

(11) Main Jet for Weber DCOM carburetors

73401
Add to cart

Main jet for the Weber DCOM carburetor.

Available from our stock in sizes:

  • 100
  • 105
  • 107
  • 110
  • 112
  • 115
  • 117
  • 120
  • 122
  • 125
  • 130
  • 135
  • 138
  • 140
  • 142
  • 145
  • 150
  • 152
  • 155
  • 160
  • 165
  • 170
  • 175
  • 180
  • 185
  • 190
  • 195
  • 200
  • 205
  • 210
  • 215
  • 220
  • 225
  • 230
  • 235
  • 240
  • 245
  • 250

Required quantity per carburettor: 2

This is item number 11 in the drawing.

(11) Main Jet for Weber DCOM carburetors

  • More
  • Related Products

(11) Main Jet for Weber DCOM carburetors
(11) Main Jet for Weber DCOM carburetors
(11) Main Jet for Weber DCOM carburetors
(11) Main Jet for Weber DCOM carburetors
(11) Main Jet for Weber DCOM carburetors

(12) Choke / Venturi for Weber DCOM carburetors

72302
Add to cart

Venturi (or choke if you want) for the Weber DCOM 40 series carburetors.

These choke are suitable for the Weber DCOE 40 and some of the DCOM models.

Dimensions:

  • 44.9 mm diameter at the widest part
  • 43 mm at the shoulder
  • 37.5 mm long

Please check these dimensions against your existing chokes to be sure that they will fit your DCOM.

These chokes are NOT fitted with locating pin as this is not required.

Available in the following sizes:

  • 26 mm internal diameter
  • 28 mm internal diameter
  • 30 mm internal diameter
  • 32 mm internal diameter
  • 34 mm internal diameter
  • 36 mm internal diameter

Other sizes are available on special request.
Please contact us with your requirements.

Required quantity per carburettor: 2

This is number 12 in the drawing.

(12) Choke / Venturi for Weber DCOM carburetors

  • More
  • Related Products

(12) Choke / Venturi for Weber DCOM carburetors
(12) Choke / Venturi for Weber DCOM carburetors
(12) Choke / Venturi for Weber DCOM carburetors
(12) Choke / Venturi for Weber DCOM carburetors
(12) Choke / Venturi for Weber DCOM carburetors

(38) R Clip for pump rod for Weber DCOM carburetors

32610.003
Add to cart

This is the "R" shaped clip used to hook-up the pump rod on Weber DCOM carburetors.

Required quantity per carburettor: 1

This is item number 38 in the drawing.

 

(38) R Clip for pump rod for Weber DCOM carburetors

  • More
  • Related Products

(38) R Clip for pump rod for Weber DCOM carburetors
(38) R Clip for pump rod for Weber DCOM carburetors
(38) R Clip for pump rod for Weber DCOM carburetors
(38) R Clip for pump rod for Weber DCOM carburetors
(38) R Clip for pump rod for Weber DCOM carburetors

(45) Pump Rod Assembly for Weber DCOM carburetors

IDFPUMPROD
Add to cart

Complete pump rod assembly for the Weber DCOM carburetors.

The original pump rod assembly for the DCOM is no longer available but this assembly from the Weber IDF will fit the DCOM without problems.

The assembly consists of a number of parts which are NOT available separately (except for the "R" clip).

Complete assembly as depicted in the photographs.

Required quantity per carburettor: 1

This is item number 45 in the drawing.

(45) Pump Rod Assembly for Weber DCOM carburetors

  • More
  • Related Products

(45) Pump Rod Assembly for Weber DCOM carburetors
(45) Pump Rod Assembly for Weber DCOM carburetors
(45) Pump Rod Assembly for Weber DCOM carburetors
(45) Pump Rod Assembly for Weber DCOM carburetors
(45) Pump Rod Assembly for Weber DCOM carburetors

(46) Choke Activating Mechanism for Weber DCOM carburetors

32556.018
Add to cart

Choke activating mechanism for the Weber DCOM carburetors.

Complete assembly as depicted in the photographs.

Required quantity per carburettor: 1

This is item number 46 in the drawing.

 

(46) Choke Activating Mechanism for Weber DCOM carburetors

  • More
  • Related Products

(46) Choke Activating Mechanism for Weber DCOM carburetors
(46) Choke Activating Mechanism for Weber DCOM carburetors
(46) Choke Activating Mechanism for Weber DCOM carburetors
(46) Choke Activating Mechanism for Weber DCOM carburetors
(46) Choke Activating Mechanism for Weber DCOM carburetors(46) Choke Activating Mechanism for Weber DCOM carburetors
(46) Choke Activating Mechanism for Weber DCOM carburetors

Choke Activating Mechanism REPAIR KIT for Weber DCOM carburetors

32556.018REPAIR
Add to cart

Repair kit for the choke activating mechanism for the Weber DCOM carburetors.

Set of gears, as shown in photo 1, to replace worn or damaged gears in the choke piston lifting mechanism.

Photo 2 is for illustration purposes only and shows the set installed in the activating mechanism.

Required quantity per carburettor: 1

This is item is NOT in the drawing but is part of assembly number 46.

Choke Activating Mechanism REPAIR KIT for Weber DCOM carburetors

  • More
  • Related Products

Choke Activating Mechanism REPAIR KIT for Weber DCOM carburetors
Choke Activating Mechanism REPAIR KIT for Weber DCOM carburetors
Choke Activating Mechanism REPAIR KIT for Weber DCOM carburetors
Choke Activating Mechanism REPAIR KIT for Weber DCOM carburetors
Choke Activating Mechanism REPAIR KIT for Weber DCOM carburetors
Choke Activating Mechanism REPAIR KIT for Weber DCOM carburetors
Choke Activating Mechanism REPAIR KIT for Weber DCOM carburetors

(52) Choke Spring Retainer for Weber DCOM carburetors

52030.003
Add to cart

Choke Spring Retainer for Weber DCOM carburetors.

Secures the choke piston spring in its bore.

Required quantity per carburettor: 2

This is item number 52 in the drawing.

 

 

 

(52) Choke Spring Retainer for Weber DCOM carburetors

  • More
  • Related Products

(52) Choke Spring Retainer for Weber DCOM carburetors
(52) Choke Spring Retainer for Weber DCOM carburetors
(52) Choke Spring Retainer for Weber DCOM carburetors
(52) Choke Spring Retainer for Weber DCOM carburetors
(52) Choke Spring Retainer for Weber DCOM carburetors

(57) Mixture Screw for Weber DCOM carburetors

64750.058
Add to cart

Mixture screw for the Weber DCOM carburetor.

This is the version that uses an o-ring rather than a spring to lock its setting.

Required quantity per carburettor: 2

This is item number 57 in the drawing.

 

 

 

(57) Mixture Screw for Weber DCOM carburetors

  • More
  • Related Products

(57) Mixture Screw for Weber DCOM carburetors
(57) Mixture Screw for Weber DCOM carburettors
(57) Mixture Screw for Weber DCOM carburetors
(57) Mixture Screw for Weber DCOM carburettors
(57) Mixture Screw for Weber DCOM carburetors

(62) Pump Demand Ball Valve for Weber DCOM carburetors

58300.003
Add to cart

Pump demand ball valve for the Weber DCOM carburetors.

Ball bearing of the correct weight and size for the pump mechanism.

Required quantity per carburettor: 2

This is item number 62 in the drawing.

 

 

(62) Pump Demand Ball Valve for Weber DCOM carburetors

  • More
  • Related Products

(62) Pump Demand Ball Valve for Weber DCOM carburetors
(62) Pump Demand Ball Valve for Weber DCOM carburettors
(62) Pump Demand Ball Valve for Weber DCOM carburetors
(62) Pump Demand Ball Valve for Weber DCOM carburettors
(62) Pump Demand Ball Valve for Weber DCOM carburetors

(63) Pump Jet Weight Spring for Weber DCOM carburetors

47600.296

Pump jet weight spring for the Weber DCOM carburetors.

Dampens the movement of the pump weight.

Required quantity per carburettor: 2

This is item number 63 in the drawing.

Please note that this spring is no longer available!

 

(63) Pump Jet Weight Spring for Weber DCOM carburetors

  • More
  • Related Products

(63) Pump Jet Weight Spring for Weber DCOM carburetors
(63) Pump Jet Weight Spring for Weber DCOM carburetors
(63) Pump Jet Weight Spring for Weber DCOM carburetors
(63) Pump Jet Weight Spring for Weber DCOM carburetors
(63) Pump Jet Weight Spring for Weber DCOM carburetors

(65) Pump Cover Screw for Weber DCOM carburetors

61015.002
Add to cart

Cover screw to close the pump bore on the Weber DCOM carburetors.

Required quantity per carburettor: 2

This is item number 65 in the drawing.

 

 

 

 

(65) Pump Cover Screw for Weber DCOM carburetors

  • More
  • Related Products

(65) Pump Cover Screw for Weber DCOM carburetors
(65) Pump Cover Screw for Weber DCOM carburetors
(65) Pump Cover Screw for Weber DCOM carburetors
(65) Pump Cover Screw for Weber DCOM carburetors
(65) Pump Cover Screw for Weber DCOM carburetors

(68) Brass Float for Weber DCOM carburetors

41030.005
Add to cart

Brass float for the Weber DCOM series carburettors.

Please note that there are also plastic floats available but these should NOT be interchanged with this brass version!.

Required quantity per carburettor: 1

This is item number 68 in the drawing.

(68) Brass Float for Weber DCOM carburetors

  • More
  • Related Products

(68) Brass Float for Weber DCOM carburetors
(68) Brass Float for Weber DCOM carburetors
(68) Brass Float for Weber DCOM carburetors
(68) Brass Float for Weber DCOM carburetors
(68) Brass Float for Weber DCOM carburetors

(71) Jet Cover for Weber DCOM carburetors

32376.003
Add to cart

Jet cover assembly for the Weber DCOM carburetor.

Assembly includes wing nut and small fiber seal, but not the large seal.

Required quantity per carburettor: 1

This is item number 71 in the drawing.

 

(71) Jet Cover for Weber DCOM carburetors

  • More
  • Related Products

(71) Jet Cover for Weber DCOM carburetors
(71) Jet Cover for Weber DCOM carburettors
(71) Jet Cover for Weber DCOM carburetors
(71) Jet Cover for Weber DCOM carburettors
(71) Jet Cover for Weber DCOM carburetors

(74) Spring for Mixture Screw on Weber DCOM carburetors

47600.007
Add to cart

Mixture screw spring for the Weber DCOM carburetor.

Spring that secures the setting on the idle mixture screw.

Please note that not all versions use a spring.

Required quantity per carburettor: depending on set-up

This is item number 74 in the drawing.

 

(74) Spring for Mixture Screw on Weber DCOM carburetors

  • More
  • Related Products

(74) Spring for Mixture Screw on Weber DCOM carburetors
(74) Spring for Mixture Screw on Weber DCOM carburetors
(74) Spring for Mixture Screw on Weber DCOM carburetors
(74) Spring for Mixture Screw on Weber DCOM carburetors
(57) Spring for Mixture Screw on Weber DCOM carburetors

(75) Venturi Grub Screw for Weber DCOM carburetors

64830.006
Add to cart

Grub screw used to locate the auxiliary venturi on the Weber DCOM carburetors.

Required quantity per carburettor: 2

This is item 75 in the drawing.

 

 

 

 

(75) Venturi Grub Screw for Weber DCOM carburetors

  • More
  • Related Products

(75) Venturi Grub Screw for Weber DCOM carburetors
(75) Venturi Grub Screw for Weber DCOM carburetors
(75) Venturi Grub Screw for Weber DCOM carburetors
(75) Venturi Grub Screw for Weber DCOM carburetors
(75) Venturi Grub Screw for Weber DCOM carburetors

(76) Lock Nut for Venturi Grub Screw on Weber DCOM carburetors

34710.003
Add to cart

Locknut to secure the venturi grub screw on the Weber DCOM carburetors.

Required quantity per carburettor: 2

This is item 76 in the drawing.

(76) Lock Nut for Venturi Grub Screw on Weber DCOM carburetors

  • More
  • Related Products

(76) Lock Nut for Venturi Grub Screw on Weber DCOM carburetors
(76) Lock Nut for Venturi Grub Screw on Weber DCOM carburetors
(76) Lock Nut for Venturi Grub Screw on Weber DCOM carburetors
(76) Lock Nut for Venturi Grub Screw on Weber DCOM carburetors(76) Lock Nut for Venturi Grub Screw on Weber DCOM carburetors

Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOM carburetors

M1281
Add to cart

Main command lever with extra long tongue for the Weber DCOM carburetors.

Designed and produced by John Mangoletsi's company "Mangoletsi Design", the lever is equipped with a 40 mm long "tongue" and can therewith be used in situations where the carburetor spacing is wider than standard.

This lever matches up with balance lever assembly 45048.149.

Required quantity per set of carburetors: 1

This is item NOT in the drawing.

Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOM carburetors

  • More
  • Related Products

Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOM carburetors
Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOM carburetors
Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOM carburetors
Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOM carburetors
Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOM carburetors

Cosworth Carburettor Mounts - carburetor to manifold

cosx4
Add to cart

Developed by British-based racing engineers Cosworth, these buffers are specifically designed to be used in conjunction with Misab-plates.

Nowadays produced by that same Misab company from Sweden, the mounts are strong enough to ensure an airtight seal while also providing enough vibration damping.

Each mount consists of two cups and one rubber buffer.

Install the Misab-plates, install your carb(s), install the Cosworth mounts using a Nyloc nut (NOT included in the standard set!) and set the distance between the cups to 2 millimeter, using a normal feeler gauge.
The buffer is now set to the correct tension to dampen vibrations but not allowing air leaks.

These mounts are supplied in sets of 4 complete mounts (as depicted) which is enough for one carburettor like a Dellorto DHLA, Solex ADDHE, Weber DCOM or Weber DCOE.

Note:
Following many requests from our customers, we have sourced superior quality stainless steel locking nuts in size M8 which is the most common size used on carburetor studs.

For your convenience, you can select these from the drop box and order them right along with the buffers but please verify that your studs have that same, M8, thread.

Cosworth Carburettor Mounts - carburetor to manifold

  • More
  • Related Products

Cosworth Carburettor Mounts - carburetor to manifold
Cosworth Carburettor Mounts - carburetor to manifold
Cosworth Carburettor Mounts - carburetor to manifold
Cosworth Carburettor Mounts - carburetor to manifold
Cosworth Carburettor Mounts - carburetor to manifold
Cosworth Carburettor Mounts - carburetor to manifold
Cosworth Carburettor Mounts - carburetor to manifold

Original Misab Plates carburetor mounts

misabx2
Add to cart

Developed by MIS AB in Sweden, these mounts are specifically designed to be used in conjunction with the Cosworth buffer mounts.

These plates ensure an airtight seal between carburettor and manifold, thanks to their vulcanized rubber ring.

For the best result, we strongly advise the combination with the Cosworth buffer mounts.

Install the Misab-plates, install your carb(s), install the Cosworth mounts using a Nyloc nut (NOT included in the standard set!) and set the distance between the cups to 2 millimeter, using a normal feeler gauge.
The buffer is now set to the correct tension to dampen vibrations but not allowing air leaks.

These MISAB plates are supplied in sets of 2 which is enough for one carburettor like a Dellorto DHLA, Solex ADDHE, Weber DCOM or Weber DCOE.

Suitable for throttle diameters up to 45 mm.

For your convenience you can order the Cosworth buffer mounts and high quality Stainless Steel Self-Locking M8 nuts right along with it.

Original Misab Plates carburetor mounts

  • More
  • Related Products

Original Misab Plates carburetor mounts
Original Misab Plates carburetor mounts
Original Misab Plates carburetor mounts
Original Misab Plates carburetor mounts
Original Misab Plates carburetor mounts

Aluminium Carburetor Mounts / Spacers 40 mm / 45 mm / 48 mm / 50 mm

SPCR
Add to cart

Machined from solid aluminium (or aluminum if you prefer...). and can be used in combination with the Cosworth buffer mounts.

Grooved on both sides to accept an O-Ring, these "spacers" ensure an airtight seal between carburettor and manifold.

For the best result, we strongly advise the combination with the Cosworth buffer mounts.

Install the o-rings in the spacers, then install your carb(s) and install the Cosworth mounts using a Nyloc nut (NOT included in the standard set!) and set the distance between the cups to 2 millimeter, using a normal feeler gauge.
The buffer is now set to the correct tension to dampen vibrations but not allowing air leaks.

These spacers are supplied in sets of 2 which is enough for one carburettor like a Dellorto DHLA, Solex ADDHE, Weber DCOM or Weber DCOE.

Also suitable for the Weber DCO/SP but that will require fitting kit FK0002.

The plates are some 6 mm think.

The mounting holes measure some 8.5 mm in diameter and are spaced at 72 mm center-to-center.

Sold, and priced, per pair and 2 O-Rings are included per spacer.

These spacers are specifically sized to work with carburetors with a corresponding throttle plate diameter so please check carefully which size you require.

We have the following sizes available:

  • 40 mm
  • 45 mm
  • 48 mm
  • 50 mm

Replacement o-rings can be purchased HERE.

For your convenience you can order the Cosworth buffer mounts and high quality Stainless Steel Self-Locking M8 nuts right along with it.

Aluminium Carburetor Mounts / Spacers 40 mm / 45 mm / 48 mm / 50 mm

  • More
  • Related Products

Aluminium Carburetor Mounts / Spacers 40 mm / 45 mm / 48 mm / 50 mm
Aluminium Carburetor Mounts / Spacers 40 mm / 45 mm / 48 mm / 50 mm
Aluminium Carburetor Mounts / Spacers 40 mm / 45 mm / 48 mm / 50 mm
Aluminium Carburetor Mounts / Spacers 40 mm / 45 mm / 48 mm / 50 mmAluminium Carburetor Mounts / Spacers 40 mm / 45 mm / 48 mm / 50 mm
Aluminium Carburetor Mounts / Spacers 40 mm / 45 mm / 48 mm / 50 mm
Aluminium Carburetor Mounts / Spacers 40 mm / 45 mm / 48 mm / 50 mm
Aluminium Carburetor Mounts / Spacers 40 mm / 45 mm / 48 mm / 50 mm
Aluminium Carburetor Mounts / Spacers 40 mm / 45 mm / 48 mm / 50 mm

Spare O-Rings for 48 MM Aluminium Carburetor Mounts / Spacers

ORINGx2
Add to cart

Replacement O-Ring for the aluminium (or aluminum if you prefer...) carburetor spacers.

These rings are suitable for a myriad of our spacers but NOT for the metal Lotus-type O-Ring carriers.

Suitable for, amongst others, the:

Sold, and priced, per pair.

Spare O-Rings for 48 MM Aluminium Carburetor Mounts / Spacers

  • More
  • Related Products

Spare O-Rings for 48 MM Aluminium Carburetor Mounts / Spacers
Spare O-Rings for 48 MM Aluminium Carburetor Mounts / Spacers
Spare O-Rings for 48 MM Aluminium Carburetor Mounts / Spacers

4 x Stainless Steel Self-Locking Nuts in size M8

51730.080
Add to cart

Following many requests from our customers, we have sourced superior quality stainless steel locking nuts in size M8 which is the most common size used on carburetor studs.

These are commonly used to secure double-barrel, horizontal, carburetors like Dellorto DHLA, Weber DCOE and Solex ADDHE to the studs in their manifolds.

Please verify that your studs have that same, M8, thread.

We sell these nuts in sets of 4.

4 x Stainless Steel Self-Locking Nuts in size M8

  • More
  • Related Products

4 x Stainless Steel Self-Locking Nuts in size M8
4 x Stainless Steel Self-Locking Nuts in size M8
4 x Stainless Steel Self-Locking Nuts in size M8

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

flexoid5xa4
Add to cart

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

  • More
  • Related Products

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Gates textile covered fuel line hose with 8 mm inner diameter

gatestextiel8mm
Add to cart

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 0.5 meter.

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

  • More
  • Related Products

Gates textile covered fuel line hose with 8 mm inner diameter
Gates textile covered fuel line hose with 8 mm inner diameter
Gates textile covered fuel line hose with 8 mm inner diameter

Cohline E10-resistant fuel line hose with 8 mm inner diameter

2134.0600
Add to cart

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an actual inner diameter of 7.5 mm and 13.5 mm outer diameter and therewith a nice and tight fit for 8 mm fuel unions.

This fuel line is DIN 73379-2a compliant.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 11 - 13 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter

  • More
  • Related Products

Cohline E10-resistant fuel line hose with 8 mm inner diameter
Cohline E10-resistant fuel line hose with 8 mm inner diameter
Cohline E10-resistant fuel line hose with 8 mm inner diameter
Cohline E10-resistant fuel line hose with 8 mm inner diameter
Cohline E10-resistant fuel line hose with 8 mm inner diameter

Endless Band Hose Clamp with Buckle - 5 mm wide

norm5mm
Add to cart

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allows you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

  • More
  • Related Products

Instructions on how to apply an "Endless Band & Buckle" hose clamp can be found at the bottow of this page.

Endless Band Hose Clamp with Buckle - 5 mm wide
Endless Band Hose Clamp with Buckle - 5 mm wide
Endless Band Hose Clamp with Buckle - 5 mm wide
Endless Band Hose Clamp with Buckle - 5 mm wide
Endless Band Hose Clamp with Buckle - 5 mm wide
Endless Band Hose Clamp with Buckle - 5 mm wide
Endless Band Hose Clamp with Buckle - 5 mm wide

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee11-13
Add to cart

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

  • More
  • Related Products

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

2134.01.0600
Add to cart

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 8 mm inner diameter and 16 mm outer diameter and is therewith suitable for 8 mm fuel unions.

This fuel line is DIN 73379 Type B compliant.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

 This fuel line uses 15 - 17 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

  • More
  • Related Products

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding
Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding
Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

Sytec Fuel Line One Way Valve

OWV
Add to cart

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

  • More
  • Related Products

Sytec One Way Fuel Line Valve
Sytec One Way Fuel Line Valve
Sytec One Way Fuel Line Valve

Carburettor Jet Gauges

jet sizer
Add to cart

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

  • More
  • Related Products

Carburettor Jet Gauges
Carburettor Jet Gauges
Carburettor Jet Gauges
Carburettor Jet Gauges
Carburettor Jet Gauges

Jet size gauge 0.5 to 1.5 mm

JSG01
Add to cart

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

Jet size gauge 0.5 to 1.5 mm

  • More
  • Related Products

Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm

54-Piece Jet Drill Set

JDK01
Add to cart

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

  • More
  • Related Products

54-Piece Jet Drill Set
54-Piece Jet Drill Set
54-Piece Jet Drill Set

Gauge Conversion Chart to Inches & MM

Gauge

Inch

Millimeter

80

0.0135

0.343

79

0.0145

0.368

78

0.0160

0.406

77

0.0180

0.457

76

0.0200

0.508

75

0.0210

0.533

74

0.0225

0.572

73

0.0240

0.610

72

0.0250

0.635

71

0.0260

0.660

70

0.0280

0.711

69

0.0292

0.742

68

0.0310

0.787

67

0.0320

0.813

66

0.0330

0.838

65

0.0350

0.889

64

0.3600

0.914

63

0.0370

0.940

62

0.0380

0.965

61

0.0390

0.991

16-Piece Jet Reamer Set

JET REAMER
Add to cart

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

  • More
  • Related Products

16-Piece Jet Reamer Set
16-Piece Jet Reamer Set
16-Piece Jet Reamer Set

Gunson Colortune See Through Spark Plug Kit

G4074
Add to cart

Gunson Colortune See Through Spark Plug Kit

  • More
  • Related Products

Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit

Gunson Carbalancer Carburetor Synchronizing Tool - G4053

G4053
Add to cart

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Article Number: G4053

Gunson Carbalancer Carburetor Synchronizing Tool - G4053

  • More
  • Related Products

Gunson Carbalancer Carburetor Synchronizing Tool - G4053
Gunson Carbalancer Carburetor Synchronizing Tool
Gunson Carbalancer Carburetor Synchronizing Tool - G4053
Gunson Carbalancer Carburetor Synchronizing Tool
Gunson Carbalancer Carburetor Synchronizing Tool - G4053
Gunson Carbalancer Carburetor Synchronizing Tool
Gunson Carbalancer Carburetor Synchronizing Tool - G4053

2 Column Manometer - Synchrometer Carbtune Pro

MANOMETER2
Add to cart

2 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easily read scale
  • Comes complete with 2 x 5mm and 2 x 6mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off adapters can be found HERE.

2 Column Manometer - Synchrometer Carbtune Pro

  • More
  • Related Products

2 Column Manometer - Synchrometer Carbtune Pro
2 Column Manometer - Synchrometer Carbtune Pro
2 Column Manometer - Synchrometer Carbtune Pro
2 Column Manometer - Synchrometer Carbtune Pro
2 Column Manometer - Synchrometer Carbtune Pro
2 Column Manometer - Synchrometer Carbtune Pro
2 Column Manometer - Synchrometer Carbtune Pro
2 Column Manometer - Synchrometer Carbtune Pro
2 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer - Synchrometer Carbtune Pro

MANOMETER4
Add to cart

4 Column Manometer / Synchronometer.

This is the New Carbtune Pro, the essential tool for balancing multiple carburettors.

  • The column type scales give a superior resolution compared to dial type gauges
  • Comes complete with 4 x 5 mm and 4 x 6 mm brass adapters and 4 silicone rubber hoses.
  • The supplied adapters will suit the Dellorto DHLA and Weber DCOE carburetors and many motorcycle carburettors.
  • The stainless steel columns indicate the vacuum that each cylinder draws
  • There is no calibration or set-up required
  • Made out of a high-impact plastic casing and scale tubes - not glass to prevent breakage
  • The built-in dampers reduce fluctuations
  • Supplied with full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off adapters can be found HERE.

4 Column Manometer - Synchrometer Carbtune Pro

  • More
  • Related Products

4 Column Manometer - Synchrometer Carbtune Pro
4 Column Manometer - Synchronometer Carbtune Pro
4 Column Manometer - Synchrometer Carbtune Pro
4 Column Manometer - Synchrometer Carbtune Pro
4 Column Manometer - Synchrometer Carbtune Pro
4 Column Manometer - Synchrometer Carbtune Pro
4 Column Manometer - Synchrometer Carbtune Pro
4 Column Manometer - Synchrometer Carbtune Pro
4 Column Manometer - Synchrometer Carbtune Pro
4 Column Manometer - Synchrometer Carbtune Pro
4 Column Manometer - Synchrometer Carbtune Pro

Brass vacuum take-off adapter for carburetors and manifolds

9679
Add to cart

Vacuum take-off adapter for Dellorto DHLA and PHF.

Vacuum take off adapter, will fit standard take off point of DHLA carburetors, DHLB carburettors, and PHF carburettors.

Thread: 5 mm x 0.8

Overall length: 20 mm

Also fits the Weber DCOE series carburettors and Solex ADDHE.

Brass vacuum take-off adapter for carburetors and manifolds

  • More
  • Related Products

Vacuum take-off adapter for Dellorto DHLA and PHF and Weber DCOE carburetors
Vacuum take-off adapter for Dellorto DHLA and PHF and Weber DCOE
Vacuum take-off adapter for Dellorto DHLA and PHF and Weber DCOE carburetors

Synchrometer airflow meter for carburetors

SYNCHRONOMETER
Add to cart

Synchrometer airflow meter for various carburetors.

Pushes into the trumpet / ram pipe / velocity stack or throat to measure the airflow to enable you to balance multiple carburettors.

  • Instructions included
  • The original genuine high quality German made product
  • Can be used for all Weber DCOE and IDF and Dellorto DHLA, DRLA carbs with round intakes or trumpets
  • Can also be used with motorcycle carburetors with round intakes

Total length of unit 121mm

Rubber cone dimensions:
Small end diameter 40mm
Large end diameter 55mm
Length of cone 36mm

Synchrometer airflow meter for carburetors

  • More
  • Related Products

Synchrometer airflow meter for carburetors
Synchrometer airflow meter for Dellorto DHLA DRLA and Weber DCOE and IDF carburettors
Synchrometer airflow meter for carburetors

4 Gauge Carburetor Synchronizing Balancing Tool

4GAUGESYNCHRO
Add to cart

Carburetor Vacuum Synchronizer Set.

4 gauge tool kit, mounted on a solid metal frame for easy reading.

The vacuum gauges range from 0 to -1 bar.

This measurement tool was designed to check and adjust motorcycles and cars with 2, 3 or 4 carburetors.

Each of the gauges is equipped with a damper to obtain stable readings.

The gauges allow to measure the vacuum in each of the gas tubes so you can make direct adjustments to obtain a smooth running engine.

The set comes with all necessary parts like:

  • 4 92 mm gauges fixed on a metal frame
  • 4 rubber hoses 8 x 5 x 750 mm
  • 4 hose clamps
  • 4 adapters M6 x 0.75 - length 53 mm
  • 4 adapters M6 x 1.00 - length 60 mm
  • 4 adapters M5 x 0.75 - length 98 mm
  • 4 adapters M6 x 0.75 - length 170 mm
  • 1 extension 6 x 55 mm
  • Red, blow-molded carry case

Fits the Dellorto DHLA, Dellorto DHLB, Dellorto DRLA, Dellorto PHF, Weber DCOE, Weber DCOM Solex ADDHE and many many more. Please check the list of adapters to see if they fit your particular carburetors.

4 Gauge Carburetor Synchronizing Balancing Tool

  • More
  • Related Products

4 Gauge Carburetor Synchronizing Balancing Tool
Vacuum Gauges Carburetor Synchronizing Balancing Tool
4 Gauge Carburetor Synchronizing Balancing Tool
4 Gauge Carburetor Synchronizing Balancing Tool
4 Gauge Carburetor Synchronizing Balancing Tool
4 Gauge Carburetor Synchronizing Balancing Tool
4 Gauge Carburetor Synchronizing Balancing Tool
4 Gauge Carburetor Synchronizing Balancing Tool
4 Gauge Carburetor Synchronizing Balancing Tool

10 ml Loctite 542 Thread Sealant

LOCTITE542-10ML
Add to cart

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant

  • More
  • Related Products

10 ml Loctite 542 Thread Sealant
10 ml Loctite 542 Thread Sealant
10 ml Loctite 542 Thread Sealant

5 ml Loctite 243 Thread Locker

LOCTITE243-5ML
Add to cart

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000

5 ml Loctite 243 Thread Locker

  • More
  • Related Products

5 ml Loctite 243 Thread Locker
5 ml Loctite 243 Thread Locker
5 ml Loctite 243 Thread Locker

Gunson Digital Exhaust Gas and CO Tester - G4125

G4125
Add to cart

Gunson Digital Exhaust Gas and CO Tester - G4125

  • More
  • Related Products

Gunson Digital Exhaust Gas and CO Tester - G4125
Gunson Digital Exhaust Gas and CO Tester
Gunson Digital Exhaust Gas and CO Tester - G4125

!