Mikuni Carburetor Service Kits

Mikuni Carburetor Service Kits
Mikuni Carburetor Service Kits

Mikuni Carburetor Service Kits.

On this page you will find our service kits for Mikuni carburettors.

Please note that some Solex carburetors were also produced under the Mikuni brand and that small differences between the two do exist.

Our Solex range of service kits can be found HERE.

Mikuni Carburetor Service Kits

Service kit for Mikuni BDST Carburetors on Suzuki GSF400 Bandit

KSK1484
Add to cart

Service Kit for the Mikuni BDST carburetors as used on the 1991 - 1993 Suzuki GSF400 Bandit.

This service kit contains the following parts to service 4 carburettors:

  • 4 x Float Bowl Gasket
  • 4 x Needle Valve

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Service kit for Mikuni BDST Carburetors on Suzuki GSF400 Bandit

  • More
  • Related Products

Service kit for Mikuni BDST Carburetors on Suzuki GSF400 Bandit
Service kit for Mikuni BDST Carburetors on Suzuki GSF400 Bandit
Service kit for Mikuni BDST Carburetors on Suzuki GSF400 Bandit

Service Kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

KSK941YK
Add to cart

Rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XVZ1200 Venture motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XVZ 1200, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Service Kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

  • More
  • Related Products

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture
Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture
Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

Service Kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

KSK941YK
Add to cart

Rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XVZ1300 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XVZ 1300, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Service Kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

  • More
  • Related Products

Service Kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture
Service Kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture
Service Kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

Service Kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

KSK941YK
Add to cart

Rebuild kit for the Mikuni BDS carburetors as used on the Yamaha VMX1200 V-Max motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha VMX 1200 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture..

Service Kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

  • More
  • Related Products

Service Kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max
Rebuild kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max
Service Kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT

KSKY0542F
Add to cart

This is our comprehensive rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

These sets include the jets as since the jet sizing is different for Front and Rear carb on the 535, there are two different sets.

This particular set is for the FRONT carburetor.

The set for the rear carburetor can be found HERE.

Alternatively, there is also a less elaborate service kit available which can be found HERE.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Jet needle 5DZ10 - Replaces Mikuni numbers 2GV-1490J-00 and 3BM-1490J-00
  • Needle jet - Replaces Mikuni number 2JU-14141-08
  • Jet size 170 - replaces Mikuni number 3G2-14231-34
  • Jet size 135 - replaces Mikuni number 3G2-14231-27
  • Jet size 70 - replaces Mikuni number 3G2-14231-14
  • Idle jet size 35 - replaces Mikuni number 4G0-14142-35-A0
  • Pipe - replaces Mikuni number 2JU-1414G-00
  • Various Viton (rubber) o-rings as per the photograph
  • Various screws as per the photograph
  • Various springs and small material as per the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT

  • More
  • Related Products

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT
Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT
Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

KSKY0542R
Add to cart

This is our comprehensive rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

These sets include the jets as since the jet sizing is different for Front and Rear carb on the 535, there are two different sets.

This particular set is for the REAR carburetor.

The set for the front carburetor can be found HERE.

Alternatively, there is also a less elaborate service kit available which can be found HERE.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Jet needle 5DZ9 - Replaces Mikuni numbers 2GV-1490J-10 and 3BM-1490J-10
  • Needle jet - Replaces Mikuni number 2JU-14141-08
  • Jet size 170 - replaces Mikuni number 3G2-14231-34
  • Jet size 137.5 - replaces Mikuni number 3G2-1423A-78
  • Jet size 70 - replaces Mikuni number 3G2-14231-14
  • Idle jet size 35 - replaces Mikuni number 4G0-14142-35-A0
  • Pipe - replaces Mikuni number 2JU-1414G-00
  • Various Viton (rubber) o-rings as per the photograph
  • Various screws as per the photograph
  • Various springs and small material as per the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

  • More
  • Related Products

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR
Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR
Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

Service Kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

KSK941YK
Add to cart

This is our standard rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

If you desire a more elaborate kit, you can find the comprehensive kit for the FRONT carburetor HERE and the one for the REAR carburetor HERE.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Service Kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

  • More
  • Related Products

Service Kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago
Rebuild kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago
Service Kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

Service Kit for Mikuni 28/32 DIDTA carburetors for Mitsubishi

ECSKT11
Add to cart

Service kit for the Mikuni 28/32 DIDTA carburetor as used mainly by Mitsubishi on the following models:

  • 1976 - 1981 Mitsubishi Celeste 1600
  • 1979 - 1982 Mitsubishi Colt 1400
  • 1974 - 1978 Mitsubishi Galant 1600
  • 1974 - 1977 Mitsubishi Galant 2000
  • 1976 - 1979 Mitsubishi Lancer 1200
  • 1974 - 1979 Mitsubishi Lancer 1400
  • 1974 - 1978 Mitsubishi Lancer 1600
  • 1977 - 1980 Mitsubishi Sigma 1600
  • 1978 - 1979 Mitsubishi Sapporo GSR 2000 Manual Gearbox

Contains, amongst others, the following parts:

  • All necessary gaskets
  • All necessary copper rings
  • All necessary aluminum rings
  • All necessary rubber (Viton) rings
  • Pump Diaphragm
  • Needle valve (size 170)

Contains the parts to service 1 carburettor.

It fits the following variations of the Mikuni DIDTA and DIDSA carburetors:

  • Mikuni 28/32 DIDTA
  • Mikuni DIDTA
  • Mikuni 30/32 DIDSA
  • Mikuni 30/32 DIDTA

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Mikuni 28/32 DIDTA carburetors for Mitsubishi

  • More
  • Related Products

Service Kit for Mikuni 28/32 DIDTA carburetors for Mitsubishi
Service Kit for Mikuni 28/32 DIDTA carburetors for Mitsubishi
Service Kit for Mikuni 28/32 DIDTA carburetors for Mitsubishi

Service Kit for Mikuni 28 DIDTA carburetors for Hyundai Pony

ECSKT11
Add to cart

Service kit for the Mikuni 28/32 DIDTA carburetor as used by Hyundai on the following models:

  • Hyundai Pony 1200 - 1238 cc
  • Hyundai Pony 1400 - 1439 cc

Contains, amongst others, the following parts:

  • All necessary gaskets
  • All necessary copper rings
  • All necessary aluminum rings
  • All necessary rubber (Viton) rings
  • Pump Diaphragm
  • Needle valve (size 170)

Contains the parts to service 1 carburettor.

It fits the following variations of the Mikuni DIDTA and DIDSA carburetors:

  • Mikuni 28 DIDTA 323

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Mikuni 28 DIDTA carburetors for Hyundai Pony

  • More
  • Related Products

Service Kit for Mikuni 28 DIDTA carburetors for Hyundai Pony
Service Kit for Mikuni 28 DIDTA carburetors for Hyundai Pony
Service Kit for Mikuni 28 DIDTA carburetors for Hyundai Pony

Service Kit for Mikuni 28 DIDTA carburetors for Hyundai Stellar

ECSKT11
Add to cart

Service kit for the Mikuni 28/32 DIDTA carburetor as used by Hyundai on the following models:

  • Hyundai Stellar 1400 - 1439 cc
  • Hyundai Stellar 1600 - 1597 cc

Contains, amongst others, the following parts:

  • All necessary gaskets
  • All necessary copper rings
  • All necessary aluminum rings
  • All necessary rubber (Viton) rings
  • Pump Diaphragm
  • Needle valve (size 170)

Contains the parts to service 1 carburettor.

It fits the following variations of the Mikuni DIDTA and DIDSA carburetors:

  • Mikuni 28 DIDTA 323

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Mikuni 28 DIDTA carburetors for Hyundai Stellar

  • More
  • Related Products

Service Kit for Mikuni 28 DIDTA carburetors for Hyundai Stellar
Service Kit for Mikuni 28 DIDTA carburetors for Hyundai Stellar
Service Kit for Mikuni 28 DIDTA carburetors for Hyundai Stellar

Service Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on the Cagiva Elefant 750 & 900.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900
Service Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900
Service Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900

Service Kit for Mikuni BDST carburetors for Ducati 400 SS SuperSport

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 400 SS SuperSport.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 400 SS SuperSport

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Ducati 400 SS SuperSport
Service Kit for Mikuni BDST carburetors for Ducati 400 SS SuperSport
Service Kit for Mikuni BDST carburetors for Ducati 400 SS SuperSport

Service Kit for Mikuni BDST carburetors for Ducati 400 Monster

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on , amongst others, the Ducati 400 Monster.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 400 Monster

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Ducati 400 Monster
Service Kit for Mikuni BDST carburetors for Ducati 400 Monster
Service Kit for Mikuni BDST carburetors for Ducati 400 Monster

Service Kit for Mikuni BDST carburetors for Ducati 600 SS

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 600 SS SuperSport.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 600 SS

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Ducati 600 SS
Service Kit for Mikuni BDST carburetors for Ducati 600 SS
Service Kit for Mikuni BDST carburetors for Ducati 600 SS

Service Kit for Mikuni BDST carburetors for Ducati 600 Monster

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on , amongst others, the Ducati 600 Monster.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 600 Monster

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Ducati 600 Monster
Service Kit for Mikuni BDST carburetors for Ducati 600 Monster
Service Kit for Mikuni BDST carburetors for Ducati 600 Monster

Service Kit for Mikuni BDST carburetors for Ducati 750 SS

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on , amongst others, the Ducati 750 SS SuperSport (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 750 SS

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Ducati 750 SS
Service Kit for Mikuni BDST carburetors for Ducati 750 SS
Service Kit for Mikuni BDST carburetors for Ducati 750 SS

Service Kit for Mikuni BDST carburetors for Ducati 750 Monster

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 750 Monster (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 750 Monster

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Ducati 750 Monster
Service Kit for Mikuni BDST carburetors for Ducati 750 Monster
Service Kit for Mikuni BDST carburetors for Ducati 750 Monster

Service Kit for Mikuni BDST carburetors for Ducati 900 SS

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 SS SuperSport (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 900 SS

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Ducati 900 SS
Service Kit for Mikuni BDST carburetors for Ducati 900 SS
Service Kit for Mikuni BDST carburetors for Ducati 900 SS

Service Kit for Mikuni BDST carburetors for Ducati 900 Monster

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 Monster (1993 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 900 Monster

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Ducati 900 Monster
Service Kit for Mikuni BDST carburetors for Ducati 900 Monster
Service Kit for Mikuni BDST carburetors for Ducati 900 Monster

Mikuni Carburetor Service Kit for Yamaha FJ1200 3CW en 3YA

KSKY0561
Add to cart

Service Kit for the Mikuni carburetors as used on the 1988 - 1995 Yamaha FJ1200 3CW en 3YA motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Needle 5FZ74
  • Needle Clip
  • Needle Jet Y-2
  • Main jet, size 110
  • Idle jet 42.5
  • Drain Plug
  • Various Viton (rubber) o-rings as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha FJ1200, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Base settings:

  • Needle: 3rd notch
  • Float Level: 21.3 - 23.3 mm
  • Mixture screw: fully in until gently seated, then 3 full turns out

This is a Carburetor City rebuild kit of superb Japanese manufacture..

Mikuni Carburetor Service Kit for Yamaha FJ1200 3CW en 3YA

  • More
  • Related Products

Mikuni Carburetor Service Kit for Yamaha FJ1200 3CW en 3YA
Mikuni Carburetor Service Kit for Yamaha FJ1200 3CW en 3YA
Mikuni Carburetor Service Kit for Yamaha FJ1200 3CW en 3YA

Service Kit for Mikuni carburetor for Yamaha XT 250

KSKY0218
Add to cart

Service Kit for Mikuni carburetor as used on the 1979 - 1990 Yamaha XT250 3Y3.

Contains the following parts to service 1 carburettor:

  • Float Chamber Gasket
  • Top Cover Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Needle Y217 - replaces Mikuni number 168-14116-67
  • Main Jet Size 165 - replaces Mikuni number 137-14143-33
  • Idle Jet Size 17.5 - replaces Mikuni number 3Y1-14142-17
  • Pump diaphragm
  • Various small items such as O-rings, washers, clip etc as per the photograph

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Service Kit for Mikuni carburetor for Yamaha XT 250

  • More
  • Related Products

Service Kit for Mikuni carburetor for Yamaha XT 250
Service Kit for Mikuni carburetor for Yamaha XT 250
Service Kit for Mikuni carburetor for Yamaha XT 250

Service Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha FZR1000 Exup.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup
Service Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup
Service Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

Service Kit for Mikuni BDST carburetors for Yamaha TDM 850

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha TDM 850.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture..

Service Kit for Mikuni BDST carburetors for Yamaha TDM 850

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Yamaha TDM 850
Service Kit for Mikuni BDST carburetors for Yamaha TDM 850
Service Kit for Mikuni BDST carburetors for Yamaha TDM 850

Service Kit for Mikuni BDST carburetors for Yamaha TRX 850

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha TRX 850.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture..

Service Kit for Mikuni BDST carburetors for Yamaha TRX 850

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Yamaha TRX 850
Service Kit for Mikuni BDST carburetors for Yamaha TRX 850
Service Kit for Mikuni BDST carburetors for Yamaha TRX 850

Service Kit for Mikuni BDST carburetors for Yamaha XTZ 750

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha XTZ 750.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Yamaha XTZ 750

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Yamaha XTZ 750
Service Kit for Mikuni BDST carburetors for Yamaha XTZ 750
Service Kit for Mikuni BDST carburetors for Yamaha XTZ 750

Service Kit for Mikuni BDST carburetors for Yamaha YZF750R

KSK688
Add to cart

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha YZF 750 R.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Yamaha YZF750R

  • More
  • Related Products

Service Kit for Mikuni BDST carburetors for Yamaha YZF750R
Service Kit for Mikuni BDST carburetors for Yamaha YZF750R
Service Kit for Mikuni BDST carburetors for Yamaha YZF750R

Service Kit for Mikuni BST33 carburetors

KSK584
Add to cart

Service Kit for Mikuni BST 33 carburetors.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

 

Service Kit for Mikuni BST33 carburetors

  • More
  • Related Products

Service Kit for Mikuni BST33 carburetors
Service Kit for Mikuni BST 33 carburetors
Service Kit for Mikuni BST33 carburetors

Elaborate Service Kit for Mikuni BST 33 carburetors

KSK1345BK
Add to cart

Elaborate Service Kit for Mikuni BST 33 carburetors.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Main Jet # 140
  • Idle Jet # 41.3
  • Needle # Y430 = 5E94
  • Needle Clip
  • Needle Jet # 584 0-2
  • Mixture Screw Assembly
  • Various Washers and Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Elaborate Service Kit for Mikuni BST 33 carburetors

  • More
  • Related Products

Elaborate Service Kit for Mikuni BST 33 carburetors
Elaborate Service Kit for Mikuni BST 33 carburetors
Elaborate Service Kit for Mikuni BST 33 carburetors

Service Kit for Mikuni BST36 carburetors

KSK1003SK
Add to cart

Rebuild Kit for Mikuni BST 36 carburetors.

Please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST36 carburetors

  • More
  • Related Products

Service Kit for Mikuni BST36 carburetors
Service Kit for Mikuni BST36 carburetors
Service Kit for Mikuni BST36 carburetors

Service Kit for Mikuni BST38 carburetors

KSK584
Add to cart

Service Kit for Mikuni BST 38 carburetors.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

 

Service Kit for Mikuni BST 38 carburetors

  • More
  • Related Products

Service Kit for Mikuni BST 38 carburetors
Service Kit for Mikuni BST 38 carburetors
Service Kit for Mikuni BST 38 carburetors

Service Kit for Mikuni BST40 carburetors

KSK584
Add to cart

Rebuild Kit for Mikuni BST 40 carburetors.

Please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST40 carburetors

  • More
  • Related Products

Rebuild Kit for Mikuni BST40 carburetors
Rebuild Kit for Mikuni BST40 carburetors
Rebuild Kit for Mikuni BST40 carburetors

Elaborate Service Kit for Mikuni BST33 carburetors for BMW F650

KSK1345BK
Add to cart

Elaborate service kit for Mikuni BST 33 carburetors as used on BMW F650 motorcycles.

Although these carburetors were originally delivered on the above mentioned BMW F-650, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Main Jet # 140
  • Idle Jet # 41.3
  • Needle # Y430 = 5E94
  • Needle Clip
  • Needle Jet # 584 0-2
  • Mixture Screw Assembly
  • Various Washers and Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Elaborate Service Kit for Mikuni BST33 carburetors for BMW F650

  • More
  • Related Products

Elaborate Service Kit for Mikuni BST33 carburetors for BMW F650
Elaborate Service Kit for Mikuni BST33 carburetors for BMW F650
Elaborate Service Kit for Mikuni BST33 carburetors for BMW F650
Elaborate Service Kit for Mikuni BST33 carburetors for BMW F650
Elaborate Service Kit for Mikuni BST33 carburetors for BMW F650

Service Kit for Mikuni BST36 carburetors for Suzuki GSX 600 F

KSK1003SK
Add to cart

Rebuild Kit for Mikuni BST 36 carburetors as used on, amongst others, the 1990 - 1997 Suzuki GSX 600F.

Please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST36 carburetors for Suzuki GSX 600 F

  • More
  • Related Products

Service Kit for Mikuni BST36 carburetors for Suzuki GSX 600 F
Service Kit for Mikuni BST36 carburetors for Suzuki GSX 600 F
Service Kit for Mikuni BST36 carburetors for Suzuki GSX 600 F

Service Kit for Mikuni BST36 carburetors for Triumph Adventurer

KSK1003SK
Add to cart

Rebuild Kit for Mikuni BST 36 carburetors as used on, amongst others, the 1996 - 1998 Triumph Adventurer.

Please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST36 carburetors for Triumph Adventurer

  • More
  • Related Products

Service Kit for Mikuni BST36 carburetors for Triumph Adventurer
Service Kit for Mikuni BST36 carburetors for Triumph Adventurer
Service Kit for Mikuni BST36 carburetors for Triumph Adventurer

Service Kit for Mikuni BST36 carburetors for Triumph Daytona

KSK1003SK
Add to cart

Rebuild Kit for Mikuni BST 36 carburetors as used on, amongst others, the 1990 - 1996 Triumph Daytona.

Please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST36 carburetors for Triumph Daytona

  • More
  • Related Products

Service Kit for Mikuni BST36 carburetors for Triumph Daytona
Service Kit for Mikuni BST36 carburetors for Triumph Daytona
SService Kit for Mikuni BST36 carburetors for Triumph Daytona

Service Kit for Mikuni BST36 carburetors for Triumph Speed Triple

KSK1003SK
Add to cart

Rebuild Kit for Mikuni BST 36 carburetors as used on, amongst others, the 1994 - 1996 Triumph Speed Triple.

Please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST36 carburetors for Triumph Speed Triple

  • More
  • Related Products

Service Kit for Mikuni BST36 carburetors for Triumph Speed Triple
Service Kit for Mikuni BST36 carburetors for Triumph Speed Triple
Service Kit for Mikuni BST36 carburetors for Triumph Speed Triple

Service Kit for Mikuni BST36 carburetors for Triumph Sprint

KSK1003SK
Add to cart

Rebuild Kit for Mikuni BST 36 carburetors as used on, amongst others, the 1993 - 1998 Triumph Sprint.

Please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST36 carburetors for Triumph Sprint

  • More
  • Related Products

Service Kit for Mikuni BST36 carburetors for Triumph Sprint
Service Kit for Mikuni BST36 carburetors for Triumph Sprint
Service Kit for Mikuni BST36 carburetors for Triumph Sprint

Service Kit for Mikuni BST36 carburetors for Triumph Thunderbird

KSK1003SK
Add to cart

Rebuild Kit for Mikuni BST 36 carburetors as used on, amongst others, the 1995 - 2002 Triumph Thunderbird.

Please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST36 carburetors for Triumph Thunderbird

  • More
  • Related Products

Service Kit for Mikuni BST36 carburetors for Triumph Thunderbird
Service Kit for Mikuni BST36 carburetors for Triumph Thunderbird
Service Kit for Mikuni BST36 carburetors for Triumph Thunderbird

Service Kit for Mikuni BST36 carburetors for Triumph Tiger 885

KSK1003SK
Add to cart

Rebuild Kit for Mikuni BST 36 carburetors as used on, amongst others, the 1993 - 1998 Triumph Tiger 885.

Please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST36 carburetors for Triumph Tiger 885

  • More
  • Related Products

Service Kit for Mikuni BST36 carburetors for Triumph Tiger 885
Service Kit for Mikuni BST36 carburetors for Triumph Tiger 885
Service Kit for Mikuni BST36 carburetors for Triumph Tiger 885

Service Kit for Mikuni BST36 carburetors for Triumph Trident

KSK1003SK
Add to cart

Rebuild Kit for Mikuni BST 36 carburetors as used on, amongst others, the 1995 - 1998 Triumph Trident.

Please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST36 carburetors for Triumph Trident

  • More
  • Related Products

Service Kit for Mikuni BST36 carburetors for Triumph Trident
Service Kit for Mikuni BST36 carburetors for Triumph Trident
Service Kit for Mikuni BST36 carburetors for Triumph Trident

Service Kit for Mikuni BST36 carburetors for Triumph Trophy

KSK1003SK
Add to cart

Rebuild Kit for Mikuni BST 36 carburetors as used on, amongst others, the 1991 - 2003 Triumph Trophy.

Please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST36 carburetors for Triumph Trophy

  • More
  • Related Products

Service Kit for Mikuni BST36 carburetors for Triumph Trophy
Service Kit for Mikuni BST36 carburetors for Triumph Trophy
Service Kit for Mikuni BST36 carburetors for Triumph Trophy

Service Kit for Mikuni BST 38 carburetors for Suzuki GSXR750W

KSK584
Add to cart

Rebuild Kit for Mikuni BST38 carburetors as used on, amongst others, the 1992 - 1995 Suzuki GSXR750W motorcycles.

Although these carburetors were originally delivered on the above mentioned Suzuki, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST 38 carburetors for Suzuki GSXR750W

  • More
  • Related Products

Rebuild Kit for Mikuni BST 38 carburetors for Suzuki GSXR750W
Rebuild Kit for Mikuni BST 38 carburetors for Suzuki GSXR750W
Rebuild Kit for Mikuni BST 38 carburetors for Suzuki GSXR750W

Service Kit for Mikuni BST40 carburetors for Aprilia Moto 6.5

KSK584
Add to cart

Rebuild Kit for Mikuni BST 40 carburetors as used on, amongst others, the Aprilia Moto 6.5.

Please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST40 carburetors for Aprilia Moto 6.5

  • More
  • Related Products

Service Kit for Mikuni BST40 carburetors for Aprilia Moto 6.5
Service Kit for Mikuni BST40 carburetors for Aprilia Moto 6.5
Service Kit for Mikuni BST40 carburetors for Aprilia Moto 6.5

Service Kit for Mikuni BST40 carburetors for KTM 640

KSK584
Add to cart

Rebuild Kit for Mikuni BST 40 carburetors as used on, amongst others, the KTM 640.

Please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST40 carburetors for KTM 640

  • More
  • Related Products

Service Kit for Mikuni BST40 carburetors for KTM 640
Service Kit for Mikuni BST40 carburetors for KTM 640
Service Kit for Mikuni BST40 carburetors for KTM 640

Service Kit for Mikuni BST40 carburetors for Suzuki GSXR1100W

KSK584
Add to cart

Rebuild Kit for Mikuni BST 40 carburetors as used on, amongst others, the 1993 - 1995 Suzuki GSXR1100W motorcycles.

Although these carburetors were originally delivered on the above mentioned Suzuki, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST40 carburetors for Suzuki GSXR1100W

  • More
  • Related Products

Rebuild Kit for Mikuni BST40 carburetors for Suzuki GSXR1100W
Rebuild Kit for Mikuni BST40 carburetors for Suzuki GSXR1100W
Rebuild Kit for Mikuni BST40 carburetors for Suzuki GSXR1100W

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki Cervo

PMH13
Add to cart

Service kit for the Solex Mikuni 28 30 PHD carburetors as used on the Suzuki Cervo.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragm
  • Various gaskets
  • Various aluminum washers
  • Copper washer
  • Rubber o-ring

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that the PHD was produced both as Solex PHD and under license by Mikuni.

The Mikuni PHD can be found HERE.
The Solex PHD can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki Cervo

  • More
  • Related Products

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki Cervo
Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki Cervo
Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki Cervo

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki LJ80 and LJ81

PMH13
Add to cart

Service kit for the Solex Mikuni 28 30 PHD carburetors as used on the 1980 - 1981 Suzuki LJ80 & LJ81.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragm
  • Various gaskets
  • Various aluminum washers
  • Copper washer
  • Rubber o-ring

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that the PHD was produced both as Solex PHD and under license by Mikuni.

The Mikuni PHD can be found HERE.
The Solex PHD can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki LJ80 and LJ81

  • More
  • Related Products

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki LJ80 and LJ81
Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki LJ80 and LJ81
Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki LJ80 and LJ81

Service Kit for Solex Mikuni 32 PHD carburetors for Suzuki SJ20

PMH13
Add to cart

Service kit for the Solex Mikuni 32 PHD carburetors as used on the 1980 - 1982 Suzuki SJ20 4WD.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragm
  • Various gaskets
  • Various aluminum washers
  • Copper washer
  • Rubber o-ring

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that the PHD was produced both as Solex PHD and under license by Mikuni.

The Mikuni PHD can be found HERE.
The Solex PHD can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex Mikuni 32 PHD carburetors for Suzuki SJ20

  • More
  • Related Products

Service Kit for Solex Mikuni 32 PHD carburetors for Suzuki SJ20
Service Kit for Solex Mikuni 32 PHD carburetors for Suzuki SJ20
Service Kit for Solex Mikuni 32 PHD carburetors for Suzuki SJ20

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki ST80 and ST90

PMH13
Add to cart

Service kit for the Solex Mikuni 28 30 PHD carburetors as used on the Suzuki ST80 and Suzuki ST90.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragm
  • Various gaskets
  • Various aluminum washers
  • Copper washer
  • Rubber o-ring

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that the PHD was produced both as Solex PHD and under license by Mikuni.

The Mikuni PHD can be found HERE.
The Solex PHD can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki ST80 and ST90

  • More
  • Related Products

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki ST80 and ST90
Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki ST80 and ST90
Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki ST80 and ST90

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

flexoid5xa4
Add to cart

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

  • More
  • Related Products

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Gates textile covered fuel line hose with 8 mm inner diameter

gatestextiel8mm
Add to cart

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 0.5 meter.

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

  • More
  • Related Products

Gates textile covered fuel line hose with 8 mm inner diameter
Gates textile covered fuel line hose with 8 mm inner diameter
Gates textile covered fuel line hose with 8 mm inner diameter

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee11-13
Add to cart

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

  • More
  • Related Products

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

54-Piece Jet Drill Set

JDK01
Add to cart

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

  • More
  • Related Products

54-Piece Jet Drill Set
54-Piece Jet Drill Set
54-Piece Jet Drill Set

Gauge Conversion Chart to Inches & MM

Gauge

Inch

Millimeter

80

0.0135

0.343

79

0.0145

0.368

78

0.0160

0.406

77

0.0180

0.457

76

0.0200

0.508

75

0.0210

0.533

74

0.0225

0.572

73

0.0240

0.610

72

0.0250

0.635

71

0.0260

0.660

70

0.0280

0.711

69

0.0292

0.742

68

0.0310

0.787

67

0.0320

0.813

66

0.0330

0.838

65

0.0350

0.889

64

0.3600

0.914

63

0.0370

0.940

62

0.0380

0.965

61

0.0390

0.991

Carburettor Jet Gauges

jet sizer
Add to cart

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

  • More
  • Related Products

Carburettor Jet Gauges
Carburettor Jet Gauges
Carburettor Jet Gauges
Carburettor Jet Gauges
Carburettor Jet Gauges

Jet size gauge 0.5 to 1.5 mm

JSG01
Add to cart

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

Jet size gauge 0.5 to 1.5 mm

  • More
  • Related Products

Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm
Jet size gauge 0.5 to 1.5 mm

16-Piece Jet Reamer Set

JET REAMER
Add to cart

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

  • More
  • Related Products

16-Piece Jet Reamer Set
16-Piece Jet Reamer Set
16-Piece Jet Reamer Set

Gunson Colortune See Through Spark Plug Kit

G4074
Add to cart

Gunson Colortune See Through Spark Plug Kit

  • More
  • Related Products

Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit
Gunson Colortune See Through Spark Plug Kit

Gunson Carbalancer Carburetor Synchronizing Tool - G4053

G4053
Add to cart

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Article Number: G4053

Gunson Carbalancer Carburetor Synchronizing Tool - G4053

  • More
  • Related Products

Gunson Carbalancer Carburetor Synchronizing Tool - G4053
Gunson Carbalancer Carburetor Synchronizing Tool
Gunson Carbalancer Carburetor Synchronizing Tool - G4053
Gunson Carbalancer Carburetor Synchronizing Tool
Gunson Carbalancer Carburetor Synchronizing Tool - G4053
Gunson Carbalancer Carburetor Synchronizing Tool
Gunson Carbalancer Carburetor Synchronizing Tool - G4053

10 ml Loctite 542 Thread Sealant

LOCTITE542-10ML
Add to cart

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant

  • More
  • Related Products

10 ml Loctite 542 Thread Sealant
10 ml Loctite 542 Thread Sealant
10 ml Loctite 542 Thread Sealant

5 ml Loctite 243 Thread Locker

LOCTITE243-5ML
Add to cart

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000

5 ml Loctite 243 Thread Locker

  • More
  • Related Products

5 ml Loctite 243 Thread Locker
5 ml Loctite 243 Thread Locker
5 ml Loctite 243 Thread Locker

Gunson Digital Exhaust Gas and CO Tester - G4125

G4125
Add to cart

Gunson Digital Exhaust Gas and CO Tester - G4125

  • More
  • Related Products

Gunson Digital Exhaust Gas and CO Tester - G4125
Gunson Digital Exhaust Gas and CO Tester
Gunson Digital Exhaust Gas and CO Tester - G4125

!