Edelbrock Carburetor Parts and Service Kits
Original Master Rebuilding Kit for Edelbrock Performer Carburetors.
Contains all the parts that need replacing when rebuilding one of these Performer Carburetors.
Factory Original kit, produced by Edelbrock in the USA.
Contains the parts to rebuild 1 carburetor.
Consists of, amongst other, the following parts:
Original Master Rebuilding Kit for Edelbrock Performer Carburetors
Original float set for Edelbrock Performer Carburetors.
Contains 2 brand new floats, 2 brand new float pivot shafts and the vital tool for setting the correct float height.
Factory Original Set, produced by Edelbrock in the USA.
Original Float Set for Edelbrock Performer Carburetors
Original Master Rebuilding Kit for Edelbrock THUNDER AVS Carburetors.
Original Master Rebuilding Kit for Edelbrock Thunder AVS Carburetors
Original float set for Edelbrock Thunder AVS Carburetors.
Original Float Set for Edelbrock Thunder AVS Carburetors
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.
Almost a "First Aid Kit" for the home mechanic!
This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.
You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.
The sheets are made of cellulose based, plasticised gelatin-impregnated material.
The sheets are of the following thickness:
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.
Textile covered for the correct "vintage" look.
This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.
It is sold in lengths of 0.5 meter.
When ordering multiple lengths, we will do our best to supply it as 1 piece.
This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.
This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel. Please note that E10 fuel resistance is NOT mentioned by the manufacturer!
Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.NOT suited for high pressure fuel injection systems.
Key Features and Benefits:
• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering• Working pressure up to 0.6 MPa (6 kg/cm²)• Temperature range from -35°C to +100°C
Maximum, single, length: 15 meters.
This hose uses 11 - 13 mm jubilee clips.
Gates textile covered fuel line hose with 8 mm inner diameter
Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.
This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.
Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.
It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).
Can be tightened using a 7 mm socket or flat head screwdriver.Excellently suited for use with our Gates Flexi Driver tool.
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp
Sytec Fuel Line One Way Valve.
We have two versions available:
Silver anodized finish.
Prevents fuel from leaking back into the fuel tank.
Suitable for regular fuel, E10, E85 and Diesel.
We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.
Sytec Fuel Line One Way Valve
Calibrated gauges to measure jet sizes.
The perfect way to determine the exact size of jets, regardless of what is indicated on them.
Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.
With these gauges, you can still determine which size these jets are.
Indispensable when working on modified carburettors!
Two different sets available:
Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mmSet 2: 16 gauges, ranging from 1,50 to 3,00 mm
Priced per set!
Carburettor Jet Gauges
Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.
Measurements are taken by inserting the tapered needle into the jet.
The size can then directly be read from the scale.
Jet size gauge 0.5 to 1.5 mm
Jet drill set comprising 50 jet drills and and 4 pin vises.
The perfect way to fine-tune any jet to suit your needs.
Also highly suited to clean clogged-up jets.
The set contains:
54-Piece Jet Drill Set
Jet reamer kit comprising 16 reamers and and a pin vise.
16-Piece Jet Reamer Set
Gunson Colortune See Through Spark Plug Kit.
The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.
The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.
It allows you to see the combustion and to adjust the mixture by color.
Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.
Colortune will fit most vehicles.
Extra adapter sizes available separately
Available in the following basic thread sizes:
For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.
Gunson Article Number: G4074
Gunson Colortune See Through Spark Plug Kit
Webcon electric fuel pump cut-off safety switch.
This inertia switch detects the rapid change in velocity of a vehicle when impacted in any direction and is designed to be wired into the supply of the fuel pump to cut the power to the pump in the event of an accident.
The switch is normally immune to normal road vibration and road irregularities.
Suitable for under-bonnet fitment providing the switch is free from the risk of spillage of liquids or direct water spray.
The installation manual (in English) can be downloaded HERE.
Please note that this is the inertia switch ONLY. In order to wire this switch into you vehicle, you need a connector set which can be purchased separately or ordered right along with the switch by selecting it through the drop box at the top of this description.
Inertia Fuel Cut-Off Switch
Connector set for our Webcon Inertia Fuel Cut-Off Switch.
This set is required when you wire our Inertia Switch into your vehicle for the first time.
The installation manual (in English) for the Inertia Switch can be downloaded HERE.
Connector Set for Inertia Fuel Cut-Off Switch
Thread Sealant - medium strength.For fine threads in hydraulic, pneumatic and general fittings.Fast curing.
LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.
Excellently suited for sealing connections on carburetors and fuel pumps!
10 ml Loctite 542 Thread Sealant
Threadlocking Adhesive - medium strength.
Suitable for all metal threaded assemblies.
LOCTITE 243 is a general purpose threadlocker of medium bond strength.This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
5 ml Loctite 243 Thread Locker
The Gunson Digital Exhaust Gas and CO Tester is the perfect (and affordable !) tool for the DIY mechanic to measure and adjust the CO-percentage in the exhaust gases of cars, motorcycles, boats etc equipped with a petrol-driven internal combustion engines.
Allows you to measure the current CO-percentage after which you can adjust it to the required level.
This system is equipped with a pulse pump and is suitable for both leaded and unleaded petrol / gasoline.
The tester will calibrate itself in the open air, has no moving parts to reduce wear and tear and has no filters.
Measures the CO % to 0,5 % accurately throughout the range.
Power: 12 Volt car- or motorcycle battery.
The set comprises the following:
If you require the owner's manual again, you can download it HERE.
Article Number: G4125
Additional instructions on adjusting the Gastester, in English, can be downloaded HERE.
This is a short instruction video, again in English:
Available from our stock, ready to be shipped.
Gunson Article Number: G4125
Gunson Digital Exhaust Gas and CO Tester - G4125
Dellorto, Weber and Solex Carburettors Spare Parts Jets Chokes Emulsion Tubes Service Kits